| Price from | 333.92 € · incl. shipping | 237.01 € · incl. shipping | N/A | N/A |
|---|---|---|---|---|
| Type | Desktop | Ball Vape | Ball Vape | Desktop |
| Heating | N/A | N/A | Hybrid | N/A |
| Battery | N/A (AC) | N/A | N/A (AC) | N/A (AC) |
Green = better value
Open in full comparison →Cannabis Hardware Zenleaf Moab is a ball vape. VapoChecker compares current offers from 324.84 € (plus shipping) across 1 shop (as of Nov 22, 2026).Price basis: Item price excluding shipping and coupons
333.92 € incl. shipping at Cannabis Hardware · Visit shop| Device Type | Ball Vape |
| Brand | Cannabis Hardware |
| Power Source | AC Power |
| Warranty | 1 year |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Metal |
| Charging Port | Mains power (AC) |
Specification sources: cannabishardware.com / products/moab-vapeManufacturer
Inside the housing sits a 25 mm axial coil; the heat shield is built into the milled aluminum housing.
In the coil you heat a Flower Diffuser for herbs or a 25 mm quartz banger for concentrates. The station keeps the piece hot until you need it. You then remove it and use it with a ShovelHead head on your own water pipe. Wireless refers to the piece in your hand; the station itself runs on mains power.
Zenleaf Moab is a base station made from 6061 aluminum by Cannabis Hardware, sold today by the manufacturer as the Moab X Pattern. The built-in 25 mm axial coil heats a Flower Diffuser for herbs or a 25 mm quartz banger for concentrates, which is then used cable-free with a ShovelHead head on your own water pipe. The station runs on mains power, with either 110 V or 220 V. The diffuser, banger, and all other accessories are sold separately.
See also: Blaze · VMAX Ball Vape · Echo Wireless Enail Station · Nova Wireless Enail Station
Moab is milled from 6061 aluminum and assembled in Florida (USA). Inside the housing sit a 25 mm axial coil and a built-in heat shield made of solid aluminum. According to Cannabis Hardware, Moab was the manufacturer's first wireless base station.
The station has compartments for a banger and a ball vape pipe, as well as two deep slots for cotton swabs and dab tools. It measures 5.5 × 4 × 2.75 inches, which is approximately 140 × 102 × 70 mm.
According to Cannabis Hardware, Moab has a built-in PID controller. The Zion station from the same series uses the same shielding concept but has no controller of its own; with that unit you plug in an existing e-nail controller. On the manufacturer's training page, a video chapter shows how to power on and set the temperature.
Cannabis Hardware does not specify a temperature range or heat-up time for Moab. As long as the station is hot, it must not be left unattended.
You place a Flower Diffuser in the coil or drop a 25 mm quartz banger in. The station keeps the piece hot until you are ready to take a hit. You then remove the diffuser or banger, seat the diffuser in the ShovelHead head, and connect it to the water pipe.
According to the manufacturer, the Flower Diffuser can be used multiple times before it needs to go back into the coil. The Moab X Pattern is compatible with Cannabis Hardware's wireless Flower Diffusers and with all previous Moab accessories. In the manufacturer's set, the diffuser is intended for herbs and the banger for concentrates.
Cannabis Hardware offers Moab at 110 V for North America and at 220 V for international use. Only the station is sold; all accessories, including Flower Diffuser and banger, are sold separately.
Those who want everything at once will find the Moab X Pattern Essentials Kit at the manufacturer. It includes the station, the VMAX diffuser with 3 mm rubies and a Cocobolo handle, a titanium ShovelHead head, a ShovelHead joint in 18.8 mm or 14 mm, a 25 mm quartz banger with air holes, and a stainless steel dabber. A water pipe is not included in the kit either.
Cannabis Hardware provides a one-year warranty on parts and labor for the station. In the event of a warranty claim, the customer bears the shipping costs, and the warranty is non-transferable.
| Price from | 333.92 € · incl. shipping | 237.01 € · incl. shipping | N/A | N/A |
|---|---|---|---|---|
| Type | Desktop | Ball Vape | Ball Vape | Desktop |
| Heating | N/A | N/A | Hybrid | N/A |
| Battery | N/A (AC) | N/A | N/A (AC) | N/A (AC) |
Green = better value
Open in full comparison →Yes. For herbs you heat a Flower Diffuser in the coil; for concentrates you heat a 25 mm quartz banger. Both are sold separately or included in the manufacturer's Essentials Kit.
According to Cannabis Hardware, Moab has a built-in PID controller. You only plug in an existing controller with the Zion station from the same series, which has no controller of its own.
Cannabis Hardware does not provide any information on this, nor on heat-up time.
The diffuser or banger. You heat it in the station's coil, remove it, and use it cable-free with a ShovelHead head on the water pipe. The station itself runs on mains power at 110 V or 220 V.
Only the station. Flower Diffuser, banger, ShovelHead head, and water pipe are sold separately. The manufacturer's Essentials Kit includes the station, diffuser, head, banger, and dabber, but likewise no water pipe.
Cannabis Hardware provides a one-year warranty on parts and labor for Moab. The customer bears the shipping costs in the event of a warranty claim.
Comments
No comments yet. Be the first!
Sign in to comment