Pros
- Ipe wood stem with titanium and stainless steel parts
- Adjust-a-Bowl for smaller loads
- Torch and compatible induction heaters
- Direct 10 mm water filter fitting
Cons
- Requires more maintenance than metal
- No precise degree-by-degree temperature control
- Heat source not mentioned in the manufacturer's scope of delivery
- No DynaVap dosing capsule listed
DynaVap WoodWynd — Price Comparison (14 shops) 90.91 €–267.85 €
Last updated: 23/09/2026, 11:06 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
The WoodWynd by DynaVap is a butane-powered hybrid vaporizer. Currently from 116.61 € across 14 shops (as of Sep 23, 2026; Code VAPOCHECKER · incl. shipping).
Specifications
| Specifications | |
|---|---|
| Heating Method | Hybrid |
| Device Type | Butane Vaporizer |
| Brand | DynaVap |
| Power Source | Butane/Flame |
| Dimensions | 10.9 cm length |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Metal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | none |
Source: OfficialOfficial, OfficialOfficial · Verified 18.02.2026
About this vaporizer
The DynaVap WoodWynd is a manual, battery-free dry herb vaporizer with a natural ipe wood stem, stainless steel crowns, Helix titanium Tip, titanium condenser, and Captive Cap. The manufacturer describes a hybrid heat transfer; heating is done with a torch or compatible induction heater until the click — without a display or precise degree-by-degree temperature selection.
The Adjust-a-Bowl function of the Helix Tip allows smaller loads. An independent product review cites approximately 0.1 g or 0.05 g in the reduced position; DynaVap itself publishes no gram figure on the current product page. The oval airport regulates airflow. The mouthpiece sits without an O-ring in the condenser and fits directly into 10 mm water filter openings, although it is not tapered.
Ipe wood is currently offered; grain and colour vary. Wood must not be soaked in alcohol. In the current US manufacturer offering, a Tin Case and Pink Slip are included; retailer packages may differ. A DynaVap dosing capsule is not listed as compatible; the DynaCoil for concentrates, however, is.
- Ipe wood stem with titanium and stainless steel parts
- Adjust-a-Bowl for smaller loads
- Torch and compatible induction heaters
- Direct 10 mm water filter fitting
- Requires more maintenance than metal
- No precise degree-by-degree temperature control
- Heat source not mentioned in the manufacturer's scope of delivery
- No DynaVap dosing capsule listed
See also: M7 TwoToniuM · M7 · UniDyn Captive · UniDyn
Who is the WoodWynd suited to?
The WoodWynd suits users looking for a manual, modular DynaVap in XL format who value natural wood grain. Anyone wanting maximum durability and the ability to drop all parts into cleaning solution without fuss will be better served by a pure metal model.
Ipe wood, Helix titanium tip, and titanium condenser
The current model combines an Ipe wood stem with stainless steel crowns, a Helix titanium tip, WoodWynd stainless steel CCD, titanium condenser with mouthpiece, and a Captive Cap. Grain and colour vary with every natural wood component. The stem is therefore not a glass piece; the vapour path is guided predominantly by the internal metal parts.
Adjust-a-Bowl instead of a dosing capsule
The official product page lists an Adjust-a-Bowl feature for smaller loads but gives no figure in grams. An independent review reports approximately 0.1 g in the standard position and 0.05 g in the reduced position. A DynaVap dosing capsule is not listed. For compatible concentrates, the manufacturer instead recommends the DynaCoil.
Torch or induction heater until the click
The WoodWynd has neither a battery nor a display. The Cap is heated with a torch or a compatible induction heater; DynaVap explicitly lists the YLL and The Wand. Around 5–7 seconds is only a manufacturer guideline: heat source, distance, and technique all affect the duration. The click signals the working range, but not an exact temperature in degrees.
Oval carb hole and direct 10 mm fitting
The oval carb hole sits at the waist of the wood stem and can be covered or opened during a draw. The mouthpiece clicks into the condenser without its own O-ring. According to DynaVap it fits directly into 10 mm water filter openings, even though the joint is not tapered.
Wood care and package contents before you buy
Never soak the wood stem in isopropyl alcohol or any other liquid. Clean metal parts separately and treat the wooden body as needed with a suitable wax or wood conditioner. The current US manufacturer listing includes the Tin Case and Pink Slip but no heat source. Retailer bundles may differ in what is included, so compare price, shipping, and accessories together.
More DynaVap Vaporizers 4
Similar Vaporizers 4
Head-to-Head Comparisons 2
Compatible Accessories
Replacement Parts
5
Replacement Parts
1Starter Bundles
DynaVap currently publishes no figure in grams but does list Adjust-a-Bowl. An independent review reports approximately 0.1 g, or 0.05 g in the reduced position.
Yes. DynaVap lists the YLL and The Wand as compatible induction heaters. A torch works just as well.
Yes, to a suitable female 10 mm opening. DynaVap notes that the joint holds firmly despite having no taper.
A DynaVap dosing capsule is not listed for the WoodWynd. A smaller load is achieved via Adjust-a-Bowl in the Helix Tip.
Yes. DynaVap explicitly includes the DynaCoil in the WoodWynd's compatibility list.
No. DynaVap recommends against soaking the wood stem in alcohol. Metal components should be cleaned separately.
The current US manufacturer listing includes the WoodWynd, Tin Case, and Pink Slip, but no heat source. Retailer and regional bundles may vary.


































Comments
No comments yet. Be the first!
Sign in to comment