Herborizer Bubbler DigiTi 2.0
Pros
- Pure convection via a titanium heating element
- Vapor path entirely glass and titanium — no glue or plastic
- Water filtration through the bubbler base cools the vapor
- Digital PID touchscreen with a session timer
- Ground-glass joint also fits many standard bongs
- Handmade in France with hand-blown glass
Cons
- Stationary and mains-powered — not portable
- High price in the premium segment (around 460–625 €)
- Needs a water pipe or bong for full benefit
- Modular setup takes some getting used to
Herborizer Bubbler DigiTi 2.0 — Price Comparison (1 Shop)
Last updated: 23/09/2026, 1:52 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Convection |
| Device Type | Desktop |
| Brand | Herborizer |
| Power Source | AC Power |
| Temperature Range | 50°C - 500°C |
| Weight | 1400 g |
| Warranty | 2 years |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | Session |
| Temperature Control | Digital |
| Vapor Path | Glass |
About this vaporizer
The Herborizer Bubbler DigiTi 2.0 is a stationary convection vaporizer from France that works on a water-pipe principle. Its digital titanium heating element (hence "DigiTi", Digital Titanium) sits on a bubbler glass base via a ground-glass joint: hot air passes through the herb, then the vapor percolates through a water chamber and is filtered and cooled. A digital PID touchscreen with a session timer handles control; the practical temperature range sits roughly between 90 and 230 °C. The entire vapor path is borosilicate glass and titanium — no glue or plastic in the airway. Through the ground-glass joint (14.5 or 18.8 mm) the heating element also fits many standard bongs. Beyond dry herbs, the DigiTi 2.0 vaporizes concentrates too. Herborizer builds in small batches in France with hand-blown glass, so pricing sits in the premium segment (a complete station is around 460 to 625 euros). A modular, long-lasting home system that deliberately relies on glass and titanium rather than electronics in the vapor path.
- Pure convection via a titanium heating element
- Vapor path entirely glass and titanium — no glue or plastic
- Water filtration through the bubbler base cools the vapor
- Digital PID touchscreen with a session timer
- Ground-glass joint also fits many standard bongs
- Handmade in France with hand-blown glass
- Stationary and mains-powered — not portable
- High price in the premium segment (around 460–625 €)
- Needs a water pipe or bong for full benefit
- Modular setup takes some getting used to
See also: Herborizer XL · System Ti · Herborizer DigiTi · L Sphere
Convection with a titanium injector
PID controller from 50 to 500 °C
Bubbler with water filtration
Package contents and modularity
Official Resources
Similar Vaporizers 1
Spec comparison
| Bubbler DigiTi 2.0 | Herborizer XL | |
|---|---|---|
| Type | Desktop | Desktop |
| Heating | Convection | Convection |
| Temperature | 50°C - 500°C | 90°C - 230°C |
| Heat-up time | N/A | 600s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | N/A | N/A |
| Bubbler DigiTi 2.0 | System Ti | |
|---|---|---|
| Type | Desktop | Desktop |
| Heating | Convection | Convection |
| Temperature | 50°C - 500°C | 90°C - 300°C |
| Heat-up time | N/A | 120s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | N/A | N/A |
Compatible Accessories
By convection: A 100-W titanium injector heats the air, which then flows through the material.
No. 50 to 500 °C is the controller's adjustment range. Herborizer specifies 160 to 220 °C for dry herbs.
Yes, the optional E-Nail equipment is designed for this purpose.
Herborizer specifies a height of approximately 23 cm and a total weight of 1.4 kg.
The complete set includes a bowl with an 18.8-mm ground-glass joint.
Comments
No comments yet. Be the first!
Sign in to comment