Ispire V-Wand is an e-rig. VapoChecker compares current offers from 109.14 € (plus shipping) across 2 shops (as of Nov 22, 2026).Price basis: Item price excluding shipping and coupons
Ispire sums it up as “A Safer Alternative to Torches”.
In the box: two borosilicate bangers (straight and angled), two concentrate cups, a carb cap and a pair of 18650 batteries. A dab rig is not part of the kit. Settings run from 250 to 800 °F. Other models from the brand are listed on the Ispire brand page.
About this vaporizer
The Ispire V-Wand is a battery-powered induction e-nail for concentrates. You place it over a glass banger on your own dab rig, and a magnetic field heats the metal core sealed inside the glass of the concentrate cup. The concentrate only touches glass, and no torch is needed.
Temperature is adjustable from 250 to 800 °F (121 to 427 °C), in auto or manual mode. Two replaceable 18650 batteries charge via USB-C in the device or externally. The kit includes a straight and an angled banger, two cups and a carb cap; no water pipe is included.
The unit has a ring-shaped opening, the induction ring. Inside it, a high-frequency alternating field induces eddy currents in metal, which then heats up from within without touching the coil. The manual says the inductor itself does not get hot. No fire. No cable running to a heating coil on the nail, as on many other e-nails.
Induction only warms conductive material, so some metal has to sit in the field. It is hidden in the cups. Ispire's manual calls this the first e-nail to use induction heating.
Concentrate cups with a sealed metal core
Ispire lists the cups as patent pending. Each one has two borosilicate walls with a ferrous core sealed between them, cut off from the dab chamber. The cup rests inside the banger. Hold the ring over it and the core heats up, passing its warmth to glass cup and banger.
Your concentrate therefore sits on glass only. The product page calls the whole route from first contact to inhale an all-glass path, and the manual promises that neither metal nor plastic touches the material. Ispire describes the glass parts as heat- and impact-resistant.
Step by step
Press Fire five times in quick succession to switch on; the same sequence switches it off.
Pick a temperature with plus and minus.
Drop a cup into either banger and fit the banger to the rig.
Lower the device so the ring fully encloses the banger.
Heat in auto or manual mode (see below).
Lift it off, load concentrate into the cup, cap it, inhale.
For loading, Ispire suggests ceramic or glass tools. Metal would heat up in the field.
Auto and manual mode
Auto: two presses on Fire. The electronics heat to the chosen value and hold it. While warming up the LED blinks amber; a steady light plus three beeps means ready. One press ends the mode.
Manual: keep Fire held down until the target is reached, again with three beeps and amber blinking.
Done: a single beep marks the end of a heating cycle.
Celsius instead of Fahrenheit: hold plus and minus together for one second.
Sound off: hold Fire and plus for three seconds; the same combination turns it back on.
The OLED screen shows temperature and charge level.
Temperature and tolerance
The range spans 250 to 800 °F, which converts to roughly 121 to 427 °C. How precise is that? A footnote in the manual gives ±60 °F, about ±33 °C, and only with a full battery at room temperature. Treat the figure on screen as a guide, not a reading taken at the concentrate.
Batteries and charging
Two 18650 cells power the device, and both come with it. Charge them in place over USB-C, or take them out and use an external charger, which Ispire says gives a deeper charge. With a second charged pair you can swap and carry on. Ispire recommends 3000 to 3500 mAh cells rated 30 A, with no less than 15 A continuous discharge (CDR).
A warning from the manual: the hotter the setting, the fewer heat-ups you get per charge. Once charge drops below 5 %, the display blinks.
What's in the Box?
V-Wand
Straight and angled banger, borosilicate glass
2 concentrate cups
Carb cap
2 batteries (18650)
USB-C cable
Manual, warranty card
There is no water pipe. Some shops bundle a bubbler; the individual listing shows what a package contains.
Cleaning
Straight after a dab, while the cup is hot, wipe out leftovers with a cotton swab. Once everything has cooled, clean cup and banger with alcohol until no residue remains. Ispire also asks you to wipe the ring on the device after each use.
Safety and error messages
The field heats anything conductive. Keep metal out of the ring, dab needles included. Press Fire with no banger inserted and the LED blinks red.
Other warnings on the display: sensor fault, overcurrent above a 16 A load, battery nearly flat or missing, overheating. On “Too hot”, wait five minutes. Ispire states the V-Wand is not meant for nicotine products.
The manual rules out use by minors, people with respiratory conditions and pregnant or nursing women. Because of the flashing lights it also carries a warning for anyone prone to epileptic seizures.
Dabbing concentrates on a rig you already own. It makes the torch unnecessary.
Ispire never mentions that. Product page and manual only cover glass bangers and concentrate cups, not DynaVap caps.
No, just bangers, cups and a carb cap. A few retailers add a bubbler.
Between 250 and 800 °F; the screen can switch to Celsius. The footnote puts tolerance at ±60 °F.
Two 18650s, supplied. For spares Ispire points to 3000–3500 mAh and at least 15 A continuous.
Not near the ring, where it would get hot. Ceramic or glass is the safe choice.
The product page lives on ispure.com, while manual and warranty use the Ispire name (getispire.com). Same device. According to the manual it was designed in California and is made in China.
Sign-in runs through Google or Microsoft, which process data themselves in the process. We only receive your email address, your name and an account identifier, and store them to manage your account. We do not pass on your data for advertising purposes.
With your consent, we use cookies and similar technologies to store and access device information and to analyse, for example, browsing behaviour on this website.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Comments
No comments yet. Be the first!
Sign in to comment