Pros
- Ready to use: coil, quartz banger, insert, carb cap and pin all included
- Digital display with adjustment in 5 °F steps
- Wide temperature range from 104 to 532 degrees Celsius
- Axial coil heats around and beneath — even vaporization
- Auto-shutoff freely set from 0 to 5 hours
- Compact box, 800 grams, with EU cable
Cons
- Mains only, no battery — not for the road
- Quartz banger and coil are wear parts and need replacing
- No PID brand name like Auber, but a complete kit instead
- The glass accessories (banger, carb cap) are fragile
- Factory start point is 376 degrees (710 °F) — below that is for specific uses
Katalyzer Micro Enail — Price Comparison (1 Shop)
Last updated: 23/09/2026, 4:36 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Conduction |
| Device Type | Desktop |
| Brand | Katalyzer |
| Power Source | AC Power |
| Temperature Range | 104°C - 532°C |
| Temperature Control | Digital |
| Material | Concentrates |
| Replaceable Battery | No |
About this vaporizer
The Katalyzer Micro Enail is a compact desktop e-nail that ships ready to use — unlike bare controller boxes where you assemble nail and coil separately. The kit includes the axial 25-millimetre heater coil, a quartz banger (25 mm, 14 mm male), a quartz insert, a glass carb cap and the pin. Temperature runs from 104 to 532 degrees Celsius and is set digitally in five-Fahrenheit steps; the display shows the actual value. An auto-shutoff timer is adjustable between zero and five hours, set to two from the factory. The axial coil heats around and beneath the banger, giving even vaporization. With a control box of 10.8 by 7.2 by 3.6 centimetres and 800 grams, the Micro Enail stays a desktop unit with no battery. It ships with an EU cable.
- Ready to use: coil, quartz banger, insert, carb cap and pin all included
- Digital display with adjustment in 5 °F steps
- Wide temperature range from 104 to 532 degrees Celsius
- Axial coil heats around and beneath — even vaporization
- Auto-shutoff freely set from 0 to 5 hours
- Compact box, 800 grams, with EU cable
- Mains only, no battery — not for the road
- Quartz banger and coil are wear parts and need replacing
- No PID brand name like Auber, but a complete kit instead
- The glass accessories (banger, carb cap) are fragile
- Factory start point is 376 degrees (710 °F) — below that is for specific uses
See also: Weha · Katalyzer Mini · Vital V.A.P. · Katalyzer Dabalyzer
Complete rather than modular
Digital control and the axial coil
Dimensions, care and wear
Similar Vaporizers 3
Spec comparison
| Micro Enail | Katalyzer Mini | |
|---|---|---|
| Type | Desktop | Portable |
| Heating | Conduction | Conduction |
| Temperature | 104°C - 532°C | 220°C |
| Heat-up time | N/A | 25s |
| Battery | N/A (AC) | 1300 mAh |
| Price from | N/A | N/A |
| Micro Enail | Katalyzer Vapter | |
|---|---|---|
| Type | Desktop | Portable |
| Heating | Conduction | N/A |
| Temperature | 104°C - 532°C | 200°C - 220°C |
| Heat-up time | N/A | N/A |
| Battery | N/A (AC) | 1000 mAh |
| Price from | N/A | N/A |
Compatible Accessories
Adapters
5
Replacement Parts
1
Control box, axial 25-mm heating coil, quartz banger (25 mm, 14 mm male), quartz insert, glass carb cap, pin, EU cable and instructions. It is therefore ready for immediate use.
From 104 to 532 degrees Celsius (220 to 990 Fahrenheit). For concentrates, you usually use the lower to middle range.
Yes, freely adjustable between zero and five hours. At the factory setting, it switches off after two hours.
The coil surrounds the banger and heats from below at the same time, instead of only at one point. This distributes the heat more evenly.
Comments
No comments yet. Be the first!
Sign in to comment