Nectar v2
Nectar v2 is a portable dry-herb vaporizer. VapoChecker compares current offers from 89.56 € (plus shipping) across 1 shop (as of Nov 22, 2026).Price basis: Item price excluding shipping and coupons
89.56 € at Nectar Medical Vapes · Visit shopPros
- Ceramic chamber with predominantly convection heating.
- Temperature adjustable from 100 to 225 °C.
- OLED display shows the target temperature and current temperature.
- Battery with 2,600 mAh.
Cons
- Only suitable for dry herbs.
- Temperature selection in 5-degree increments.
- Charging via Micro-USB takes about two hours.
Nectar v2 — Price Comparison (1 shop)
Specifications
| Heating Method | Convection |
| Device Type | Portable |
| Brand | Nectar |
| Power Source | Battery |
| Temperature Range | 100°C - 225°C |
| Heat-up Time | 49 seconds |
| Battery Capacity | 2600 mAh |
| Weight | 124 g |
| Auto Shutoff | 5 min |
| Warranty | 12 months |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | Session |
| Temperature Control | Precise (1°C) |
| Material | Dry Herb |
| Charging Port | Micro-USB |
Read the full description
Nectar specifies a heat-up time of 49 seconds to reach 180 °C. According to the manual, the device weighs 124 g.
About this vaporizer
Nectar v2 is a portable dry-herb vaporizer with a ceramic chamber and primarily convection heating. The temperature can be adjusted in 5-degree increments from 100 to 225 °C. The battery has a capacity of 2,600 mAh and charges via Micro-USB in about two hours.
See also: Nectar Hex · Nectar Gold 2.0 · Nectar Hex Complete · Nectar Platinum+
Ceramic Chamber and Temperature
The Nectar v2 is intended exclusively for dry herbs. Nectar describes the ceramic chamber's heating method as primarily convection; additional heat is transferred through contact with the chamber walls.
The temperature range extends from 100 to 225 °C and can be adjusted in 5-degree increments. The OLED display shows the target and current temperatures. Nectar specifies 49 seconds to heat up to 180 °C.
Operation and Automatic Shutoff
Pressing the power button five times turns on the Nectar v2. Use the up and down buttons to select the temperature, then press the power button to start heating. The device vibrates when it reaches the set temperature. It switches off automatically after five minutes.
How Do I Charge the Battery Properly?
The battery has a capacity of 2600 mAh and charges via Micro-USB. According to Nectar, a full charge takes about two hours. The OLED display shows the battery level. The manual specifies a device weight of 124 g.
Accessories and Manufacturer's Warranty
The manual lists the Nectar v2, an accessory kit, a charging cable, and a QR code card as the included items. Nectar offers a separate glass adapter for connecting the device to a water pipe, which is explicitly stated to fit the V2.
Nectar provides a twelve-month limited manufacturer's warranty covering defects in materials and workmanship under normal use. If registered within one month of purchase, the warranty is valid for two years from the date of purchase.
Alternatives at a similar price 6
Frequently asked questions
No. Nectar approves the v2 exclusively for dry herbs.
Use the up and down buttons to select a temperature between 100 and 225 °C in 5-degree increments. The OLED display shows the selected and current temperatures.
Nectar specifies 49 seconds to reach 180 °C. This figure applies to that target temperature.
The battery has a capacity of 2600 mAh and charges via Micro-USB. Nectar specifies about two hours for a full charge.
Yes. Nectar offers a separate glass adapter that the manufacturer explicitly states is compatible with the V2.
Nectar provides a twelve-month limited manufacturer's warranty covering defects in materials and workmanship under normal use. If registered within one month of purchase, it is valid for two years from the date of purchase.








Comments
No comments yet. Be the first!
Sign in to comment