Sticky Brick Maxx is a butane-powered dry-herb vaporizer. VapoChecker compares current offers from 181.98 € (plus shipping) across 1 shop (as of Nov 22, 2026).Price basis: Item price excluding shipping and coupons
The manufacturer describes the Maxx as a portable desktop device with built-in storage. An 18 mm water connection is permanently installed, and a silicone hose with three adapters and a torch lighter are included. The Maxx manual is titled “Sticky Brick HydroBrick Maxx User Guide.”
About this vaporizer
Sticky Brick Maxx is a wooden vaporizer powered by the flame of a lighter. Sticky Brick describes it as on-demand convection: The material is heated only while the flame is aimed at the intake, and the device has no electronics. The Maxx has a built-in storage jar, a compartment for the stirring tool, and an 18-mm water connection. A torch lighter, a silicone tube with three adapters, and an accessory kit are included.
The Maxx housing is made of wood, with glass components and magnets. The manufacturer's website offers a choice of walnut, cherry, and maple (Rock Maple). The small block containing the chamber and screen attaches magnetically to the base. Built-in storage and a cover cap hold the accessories, including a storage jar with a cork and a compartment for the stirring stick. The heat intake has its own storage position and is placed on the small block before use.
According to Sticky Brick, a removable Restrictor Disc made of 316 stainless steel protects the wood from the direct flame and allows larger flames to be used with little practice.
Using It with the Lighter
The manual is titled “Sticky Brick HydroBrick Maxx User Guide.” First, remove the lid and move the heat intake from its storage position to the small block. Set the lighter flame to a total length of approximately 1 inch. To fill the chamber, twist the small block until the magnetic connection releases, loosely fill it with ground material no higher than the inner edge so that it evenly covers the screen, and reassemble the blocks.
While drawing, aim the flame into the heat intake, with the light blue outer part of the flame flush with the intake or just inside it. Cover the carb and draw slowly until vapor can be seen, tasted, or felt, then draw faster. At the end of the draw, remove the flame and open the carb. The material can be stirred between draws. Do not cover the air intake on the side, as it provides the necessary airflow. The included carb cork leaves one hand free and, according to the manufacturer, produces denser vapor.
Glass retains heat, so do not touch the heat intake immediately after use. According to Sticky Brick, the amount of vapor produced depends on draw speed, flame length and position, airflow at the carb, material quality, grind size, and room temperature.
Water and Accessories
For use with water, the Maxx has a built-in 18 mm connection (male). According to the manual, it accepts the included mouthpiece for use without water, Hydratubes, or the included hose, which can be used to connect your own glass. The silicone hose has three adapters: 18 mm male, 18 mm female, and 14 mm male. Sticky Brick offers Hydratubes and additional accessories as separate products.
The accessory set includes a torch lighter, five screens, two carb corks, Restrictor Discs, two wooden stirring sticks, and a stainless steel stirring tool. Butane gas is not included.
How Do I Clean and Maintain My Vaporizer?
Carefully clean the wooden parts with a cotton swab and warm water, then dry them thoroughly. Isopropyl alcohol is not intended for use on wood; for wood care, Sticky Brick recommends only its own Sticky Brick Butter. Remove the glass components and screens from the device and clean them with isopropyl alcohol as needed. During reassembly, insert the O-rings into the wood first and then insert the glass to ensure a tight seal.
Warranty and Origin
Sticky Brick provides a lifetime warranty against manufacturing defects for its devices, which the manual specifies as covering the wooden housing. Glass is covered by a 15-day warranty. The manufacturer intends to offer replacement parts indefinitely. Warranty claims apply only to purchases made directly from Sticky Brick Labs or an authorized retailer and are nontransferable.
Sticky Brick Labs is based in Sylva, North Carolina, and states that its devices are handmade in the USA.
A wooden vaporizer powered by the flame of a lighter. Sticky Brick calls it on-demand convection and describes the Maxx as a portable desktop device with built-in storage and an 18 mm water connection.
No. Sticky Brick builds its devices without electronic components. It is heated with the included torch lighter, which is filled with butane gas; the gas is not included.
Twist off the small block, loosely fill it with ground material up to the inner edge, and reassemble the blocks. Set the flame to a total length of approximately 1 inch, aim it into the heat intake, cover the carb, and draw slowly until vapor is produced. At the end of the draw, remove the flame and open the carb.
Yes. The Maxx has a built-in 18 mm connection for use with water. According to the manual, it accepts Hydratubes or the included silicone hose, which connects your own glass using adapters for 18 mm male, 18 mm female, and 14 mm male fittings.
According to the manufacturer's website, an 18 mm mouthpiece for use without water, a storage jar with a cork, a silicone hose with three adapters, and an accessory set containing a torch lighter, five screens, two carb corks, Restrictor Discs, two wooden stirring sticks, and a stainless steel stirring tool. Butane gas is not included.
A lifetime warranty against manufacturing defects in the devices, specified in the manual as covering the wooden housing; glass has a 15-day warranty. Claims apply only to purchases made directly from Sticky Brick Labs or an authorized retailer and are nontransferable.
Sign-in runs through Google or Microsoft, which process data themselves in the process. We only receive your email address, your name and an account identifier, and store them to manage your account. We do not pass on your data for advertising purposes.
With your consent, we use cookies and similar technologies to store and access device information and to analyse, for example, browsing behaviour on this website.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Comments
No comments yet. Be the first!
Sign in to comment