Sticky Brick Runt
Sticky Brick Runt is a butane-powered dry-herb vaporizer. VapoChecker compares current offers from 160 € (plus shipping) across 1 shop (as of Nov 22, 2026).Price basis: Item price excluding shipping and coupons
160.00 € at Ethos Herbals · Visit shopPros
- Torch-powered convection
- Removable intake brick for quick loading and stirring
- Tiny hardwood body
Cons
- Always requires a jet lighter
- No included water pipe adapter
- Manual torch control has a learning curve
Sticky Brick Runt — Price Comparison (1 shop) 99.97 €–160.00 €
Specifications
| Heating Method | Convection |
| Device Type | Butane Vaporizer |
| Brand | Sticky Brick |
| Power Source | Butane/Flame |
| Dimensions | 7.7 x 7.7 x 3.0 cm |
| Warranty | Lifetime |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Glass |
| Charging Port | Not needed (no battery) |
Specification sources: stickybricklabs.com / Runt-p115090458Manufacturer, stickybricklabs.com / terms-and-conditionsManufacturer (Recorded source check: 14.10.2026)
Manual & datasheet
Compatible Accessories
Read the full description
About this vaporizer
Sticky Brick Runt is a flame-powered convection block built by Sticky Brick Labs in the USA. Its hardwood chassis routes fresh air through a glass intake, so the flame never contacts the herbs yet can reach about 230 °C. There is no battery or warm-up curve—just instant heat as soon as you aim the torch.
O-rings seal the glass parts in the wood, and the removable intake brick gives you access to the chamber for loading and stirring. The Runt's short vapor path concentrates flavor, and the direct draw mouthpiece keeps the footprint tiny even though it still pairs well with j-hooks or simple whips.
Pick the Runt when you like the ritual of a jet lighter. You do need a single or dual-flame torch and a steady hand to regulate distance from the intake, because there is no WPA included and overheating can happen if you hover too close.
See also: Flip Brick · OG Brick · Sticky Brick Maxx · HydroBrick
Pure convection principle with butane flame
The Runt uses a butane flame directed through a glass intake into the herb chamber. The flame does not touch the herb – only the hot air does. This creates pure convection. The technique requires a bit of practice: the angle and distance of the flame determine the temperature. Once you get the hang of it, the Runt delivers vapor in a matter of seconds.
Handcrafted from hardwood
Each Sticky Brick is made in the USA from hardwood. Walnut, cherry or oak – depending on the batch available. Unlike glass vaporizers, it can survive the occasional drop.
True on-demand use
Where electronic devices take 10 to 30 seconds, the Runt is ready immediately. Flame in, inhale, done. Nothing happens between draws – no power consumption, no material loss. For users who prefer individual draws instead of long sessions, this is ideal. The herb chamber holds enough for 2 to 4 strong draws.
Compact and robust
With a compact footprint, the Runt is the most portable Sticky Brick. It fits in a jacket pocket, even if it is not as slim as a pen vaporizer. The only glass component is the flame intake – replacement parts are available at low cost. The wooden body is practically indestructible under normal use.
Cleaning and accessories
The glass parts can be cleaned with isopropanol, while the wooden surface can be wiped with a dry cloth. A screen in the herb chamber should be replaced regularly. For water filtration, Sticky Brick Labs sells a U-joint WPA that connects the Runt directly to 14.4 mm glass; it is not included in the box.
Butane convection
The Runt from Sticky Brick uses a jet flame torch to draw hot air through the material -- pure convection without direct contact with the flame. The herb material is heated only by the hot air, not by a surface.
Temperature control is achieved through the flame distance and heat-up time. Experienced users can hit the sweet spot within seconds. At around 230 °C maximum operating temperature, the range extends from light flavor draws to vapor. The Runt is also more compact than its bigger brother, the Sticky Brick OG.
Wood craftsmanship
Each Runt is made from solid hardwood. Sticky Brick uses various wood types -- from walnut to cherry. Every piece has its own grain and coloring. That makes each Runt unique.
The craftsmanship is visible in the precise drillings for the air path and the smooth surface. The wood does not heat up like metal. The glass components (intake and mouthpiece) can be removed for cleaning. The wood itself only needs the occasional wipe-down.
Alternatives at a similar price 6
Head-to-Head Comparisons 1
Spec comparison
| Price from | 99.97 € · other regions | 100.09 € · incl. shipping | 127.36 € · other regions | 195.63 € · incl. shipping |
|---|---|---|---|---|
| Type | Butane | Butane | Butane | Butane |
| Heating | Convection | Convection | Convection | Convection |
| Temperature | 230°C | N/A | 230°C | N/A |
| Battery | Butane | Butane | Butane | Butane |
| Weight | N/A | N/A | 190 g | N/A |
Green = better value
Open in full comparison →Frequently asked questions
A butane flame is aimed through the glass intake towards the herb chamber. The hot air vaporizes the herb by convection. The flame does not touch the material directly.
Yes, a butane pocket lighter with a directed flame (jet flame) is recommended. Standard lighters do not work well because the flame is too broad.
Various hardwoods depending on the batch – typically walnut, cherry or oak. Every piece has a unique grain.
The standard version does not have a WPA connection. However, Sticky Brick Labs sells a U-joint WPA that lets you connect the Runt directly to 14.4 mm glass.
The technique requires a bit of practice. Beginners should start with a lower flame and work their way up slowly. After a few sessions, the technique clicks.
Soak the glass parts in isopropanol, and wipe the wood with a dry cloth. Replace the screens regularly.
















Comments
No comments yet. Be the first!
Sign in to comment