Yllvape YLL 2.0 Induction Heater is an induction heater. VapoChecker compares current offers from 62.78 € (plus shipping) across 2 shops (as of Nov 22, 2026).Price basis: Item price excluding shipping and coupons
Power is supplied by two replaceable 18650 cells, which are not included. Its successor, the YLL 3.0, is listed separately here.
About this vaporizer
The YLL 2.0 is a portable induction heater for DynaVap devices: 30 to 60 W in 5 W steps, a 10–60 s timer, two replaceable 18650 cells (not included), USB-C, a display and two ceramic inserts (8 and 11 mm). Not for the HyperDyn.
Power and timer instead of a lighter
A torch lighter heats the cap unevenly and requires practice. The YLL 2.0 replaces it with a coil whose power you can set to one of seven levels between 30 and 60 watts, plus a timer from 10 to 60 seconds. A boost mode briefly runs at full power. The display shows the charge level and setting, allowing you to repeat a cycle precisely once you have found the right one.
Inserts for different tips
Two ceramic inserts with depths of 8 and 11 millimeters are included, along with a tool for changing them. This lets you adjust how deeply the cap sits within the field – the 8-mm insert heats the tip more intensely, while the 11-mm insert heats more evenly along its length. A magnetic stand holds the hot device after the cycle.
Batteries and limitations
The YLL 2.0 requires two high-drain 18650 cells with a continuous discharge rating of at least 10 amperes and charges internally via USB-C. The manufacturer explicitly excludes the HyperDyn; all standard VapCaps with a classic cap are compatible. Those wishing to heat the HyperDyn or looking for a more compact housing will find these features in the YLL 3.0.
No. The YLL 2.0 requires two 18650 cells with a continuous discharge rating of at least 10 A, which must be purchased separately. They are charged via the device's USB-C port.
All VapCaps with a standard cap – M, VonG, Omni, B, Woodwynd. According to the manufacturer, the HyperDyn is not compatible.
Using the power setting (30–60 W in 5-W increments) and the timer (10–60 s). The insertion depth of 8 or 11 mm also changes which part of the cap is heated most intensely.
The 3.0 is the successor with a new housing and support for the HyperDyn; it is listed on VapoChecker as a separate device.
Sign-in runs through Google or Microsoft, which process data themselves in the process. We only receive your email address, your name and an account identifier, and store them to manage your account. We do not pass on your data for advertising purposes.
With your consent, we use cookies and similar technologies to store and access device information and to analyse, for example, browsing behaviour on this website.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Comments
No comments yet. Be the first!
Sign in to comment