Температурный гид для бутановых вапорайзеров

Бутановые вапорайзеры не имеют регулятора температуры — тепло идёт от пламени, и вы контролируете его техникой: where you aim the flame, how long you heat, how fast you draw. Этот гид содержит практические настройки для 14 популярных бутановых вапорайзеров. Все температуры приблизительны; реальная температура камеры зависит от типа горелки, размера пламени, расстояния и температуры окружающей среды.

Исследование в Journal of Cannabis Therapeutics подтверждает, что испарение при 180–220 °C высвобождает более 95 % доступного ТГК при значительно меньшем количестве побочных продуктов горения по сравнению с курением (Hazekamp et al., 2006). Для бутановых устройств это означает, что техника важнее самого устройства.

Быстрое сравнение — температурные диапазоны и техника нагрева

Устройство	Клик?	Нагрев	Горелка	Низкая (вкус)	Средняя	Высокая (экстракция)
DynaVap M7/M+	Да (2×)	3–7 s	Single / Triple	Flame at cap tip (crimp) → ~185–210 °C	Mid-cap → ~220–240 °C	Cap base → ~240–260 °C
DynaVap B / B2	Да (2×)	3–7 s	Single / Triple	Same as M series, cooler vapor via wood/glass body	Same as M series	Same as M series
Vestratto Tornado	Да (Multi)	25–35 s	Triple / Quad	Single torch, keep distance	Triple torch, mid-oven	Large torch, full power
Vestratto Anvil	Да (1×)	12–40 s	Single / IH	Flame on upper body	Mid-body, standard click	Flame near bowl area
Tempest 2	Да (visual)	30–45 s	Single / Double	Heat lower section → ~200–220 °C	Through first click → ~230–260 °C	Lower + SS section → ~270–300 °C
Dani Fusion 2.0	Да (1×)	10–15 s	Culinary torch min.	Stop at click	2–3 s past click	3–5 s past click (caution!)
Sticky Brick	Нет	Мгновенно	Small single	Fast draw + flame far	Medium draw + distance	Slow draw + flame close
Vapman Click	Да (1×)	5–10 s	Single jet only	Stop before click	Inhale at click	2–3 s past click
Lotus	Нет	3–5 s	Single	Fast draw + gentle flame	Medium draw	Slow draw + full flame
Camouflet Convector	Нет	7–15 s	Single jet	7–8 s heating	10–12 s heating	13–15 s heating
Lamart PIRO	Нет	Мгновенно	Thin single	Far, fast draw	Medium distance	Close, slow draw
Simrell FMJ	Via DV cap	3–7 s	Single / Triple	Draw before click	Full click cycle	Use FMJ heat reservoir
Simrell MVS	Via DV cap	3–7 s	Single / Triple	Airport open	Airport half open	Airport closed

DynaVap — положение пламени как регулятор температуры

All DynaVap devices (M7, M Plus, The B, B2, VonG, WoodWynd, HyperDyn, UniDyn) use the same bimetallic click cap system. Cap кликает примерно при 230–250 °C — where exactly depends on where the flame hits the cap. Биметаллический диск деформируется при калиброванной температуре, создавая слышимый клик — встроенную защиту от горения.

Пламя на кончике cap (crimp end): Heat takes longer to reach the chamber. Result: lower chamber temperature (~185–210 °C), terpene-rich flavor, lighter vapor. Ideal for the first heat cycle on a fresh bowl.

Flame at cap base (toward mouthpiece): Heats the chamber directly — the bimetallic disc clicks early, but chamber temp is higher (~240–260 °C). Dense vapor, strong extraction, darker roast. Good for second or third heat cycles.

Rotation: Spin the DynaVap continuously in one direction between thumb and index finger (“infinite spin”). Prevents hot spots and ensures even heating. Less critical with a triple torch but still recommended.

Torch type: Single torch = more control, better for flavor. Triple torch = faster, more even heating, better for maximum extraction. Hold the torch about 4 cm away and aim at the light blue halo of the flame (hottest zone), not the dark inner cone.

Vestratto Tornado — двойной атомайзер для продвинутых

The Tornado uses a CopperCore with two atomizers: the primary vaporizes, the secondary refines the vapor. Heat-up time is 25–35 seconds — much longer than DynaVap due to greater thermal mass.

Flame position: Between and just above the vent holes on the oven section. Lower toward the neck = darker, warmer results. No rotation needed — the CopperCore distributes heat evenly.

Torch: The Tornado rewards power, not restraint. A strong triple or quad torch at full power is the sweet spot. A single pocket torch works but the Tornado is built for intense extraction.

Vestratto Anvil — клик измеряет реальную температуру камеры

The Anvil’s key difference from DynaVap: its bimetallic click measures actual chamber temperature, not the cap surface. This makes it more consistent across torch types.

Upper body: Cooler extraction, flavor-forward. Lower bowl area: More conduction heat on top of convection, denser vapor. No rotation needed. Airflow: Restricted = hotter, denser. Open = cooler, more flavor. Adjustable mid-draw.

MAD Heaters Tempest 2 — шариковый вапорайзер с кликом

The Tempest 2 uses steel or zirconia balls in the oven that store heat and release it to the air during draws. Click-based temperature indicator.

Heating zone: Torch the lower section first (heats the balls), then the stainless steel section above for more extraction. This shifts the ratio toward conduction. Draw technique: Long, slow draws with the air hole covered are most effective — increases chamber pressure and temperature.

Dani Fusion 2.0 — один клик, два метода нагрева

The Dani Fusion combines a conduction cap with a convection air path. A single click (not two like DynaVap) signals operating temperature. Needs at least a dual-flame pocket torch or culinary torch — standard lighters are underpowered.

Technique: Heat the lower cap side. Stop at click = flavor-forward hit. 2–3 seconds past click = full extraction. Past 5 seconds = combustion risk. The 2.0 version has a narrower window between click and combustion than the 1.0. Known as one of the most flavor-intense butane vaporizers at low temperatures.

Sticky Brick — скорость затяжки как термостат

Sticky Bricks (Junior, Runt, OG, Flip, HydroBrick Maxx) are pure convection vaporizers with no click system. The flame heats air in the wood intake, which flows through the material. Контроль температуры через три фактора: flame distance (farther = cooler), draw speed (faster = cooler), and flame size (smaller = cooler). Чисто конвекционные вапорайзеры типа Sticky Brick обеспечивают до 40 % более равномерную экстракцию, чем кондукционные, так как горячий воздух проникает равномерно по всей камере (Wang et al., Scientific Reports, 2016).

Beginner tip: Insert the restrictor disc (316 SS) between flame intake and chamber. It buffers excess heat and significantly reduces combustion risk during the learning phase.

Vapman — швейцарская точность золотого конуса

The Vapman uses a wok-shaped, gold-plated copper chamber heated directly from below. Mainly conduction with some convection.

“Tip-to-tip” rule: Aim the jet flame tip directly at the gold cone tip underneath the device, perpendicular (90°) from below. Pulse technique: 3–4 seconds heat, 3–4 seconds pause, repeat 2–3 cycles. A thin wisp from the mouthpiece = ready. Burnt popcorn smell = too hot. Vapman Click: Clicks at ~180 °C. Bowl holds only ~0.1 g — ideal for microdosing.

Lotus — нагрев и затяжка одновременно

The Lotus by INHALE works differently from everything else on this list: you torch and draw at the same time. Aim at the center of the lotus engraving on the cap, move slowly in circles, and inhale gently. Draw speed is the main temperature control: fast draw = cooler, slow draw = hotter. The design keeps herb completely isolated from combustion gases.

Camouflet Convector — сверхнизкая термальная масса

The Convector (V1, V2, XL) has extremely low thermal mass: fast heat-up, fast cool-down. No click — heating duration determines temperature. Heat the end cap with a single-jet torch: 7–8 s = flavor, 10–12 s = balanced, 13–15 s = full extraction. Pack loosely — pure convection needs good airflow.

Simrell FMJ и MVS — апгрейды для DynaVap

FMJ (Full Metal Jacket): Stainless steel sleeve around the DynaVap tip area, acts as a heat reservoir. One heat cycle can extract the full bowl. Aim at the logo etching. MVS (Modular Vortex System): Teardrop airports are the main temperature control. Closed = higher pressure/temp/density. Open = cooler, more flavor. Adjustable mid-hit.

Общие советы для бутановых вапорайзеров

Несколько простых правил определяют разницу между стабильной экстракцией и сгоревшим материалом. Сообщество FuckCombustion, крупнейший форум вапорайзеров с более чем 100 000 участников, рекомендует эти пять практик для бутановых вапорайзеров.

1. Одинарная горелка для вкуса, тройная для экстракции. This rule applies to nearly all click-based devices. For Sticky Bricks and Lotus, the smallest functional single torch is best.
2. Нагрев после клика повреждает биметаллический диск over time and risks combustion. Do a second heat cycle instead.
3. Ограничение потока воздуха повышает температуру. Applies to all devices: close the carb hole, cover the airport, draw slower.
4. Перемешивайте между циклами нагрева. Butane vaporizers extract less evenly than electronic devices. A quick stir redistributes the material.
5. Используйте качественный бутановый газ. Cheap gas contains impurities that clog torch nozzles. Brands like Xikar, Colibri, or Newport are worth it.

Часто задаваемые вопросы

Как контролировать температуру на бутановом вапорайзере без дисплея?

You control temperature through three variables: flame position on the cap or intake (DynaVap, Tornado, Anvil), draw speed (Sticky Brick, Lotus, PIRO — faster draw = cooler), and heating duration (Camouflet, Dani Fusion). Most devices use a combination. After 5–10 bowls you will have your technique dialed in. Оптимальное окно испарения составляет 180–220 °C для большинства растительного материала (Hazekamp et al., 2006).

Одинарная или тройная горелка — что лучше?

Neither is “better” — they serve different purposes. Single torch gives more control, heats slower, suits terpene-rich low-temp sessions. Triple torch heats faster and more evenly, better for high temperatures and maximum extraction. For Sticky Bricks and Lotus, always use a single torch.

Можно ли использовать обычную зажигалку?

No. Jet-flame lighters (torches) are required. A soft flame lacks focused heat, leaves soot on the cap, and fails in any wind. Exception: some VaporGenie models are designed for soft flames.

Что происходит при нагреве после клика?

The material combusts instead of vaporizing — you taste burnt plant matter instead of terpenes. Repeated overheating permanently deforms the bimetallic disc, making the click point unreliable. Never heat past the click. For more extraction: let the cap cool (second click), then reheat.

Какой бутановый вапорайзер лучше для новичков?

The DynaVap The B or M7: the click system provides a clear audible signal when temperature is reached. Alternatively, a Sticky Brick Runt with restrictor disc — easiest to use in the Sticky Brick family.

DynaVap или Sticky Brick — в чём главное отличие?

DynaVap heats the chamber externally (primarily conduction), has a click safety system, and works with small bowls (~0.1 g). Sticky Bricks use pure convection — the flame heats air, not the device. No click, but larger bowls and instant hits with no heat-up phase. DynaVap is more beginner-friendly; Sticky Bricks reward technique with intense flavor.

Индукционные нагреватели лучше горелок?

For home use yes, on the go no. Induction heaters (like the Ispire Wand or Vestratto FORGE) deliver repeatable results without flame — no butane, works in wind. Downsides: more expensive, less portable (battery needed). For home use, an IH is a real upgrade. On the go, a torch stays more practical.

На сколько хватает заправки горелки?

A single torch typically lasts 50–80 DynaVap bowls per fill. A triple torch uses more gas, managing 30–50 bowls. Culinary torches (for Dani Fusion, Tornado) last much longer due to their bigger tank. Quality butane (Xikar, Colibri) clogs nozzles less.

Какой бутановый вапорайзер даёт лучший вкус?

The Dani Fusion 2.0 tops the flavor charts — especially at the click point with low temperatures. Also outstanding: Lotus (pure convection, no butane contact with herb), Vapman (gold plating adds no taste), and DynaVap with Low Temp Cap heated at the tip. Among Sticky Bricks, the OG Brick is the flavor king thanks to its longest vapor path.