Pros
- Induction heating for even, clean heat.
Cons
- Heavy at 277 g.
- No dosing caps.
- No app.
Cuboo Heater Pro V2 — Price Comparison (6 shops)
Puff Puff Palace
(5 Shops)
▸
Puff Puff Palace UK 96.34 € (£82.64) Puff Puff Palace EU 99.99 € Puff Puff Palace DE 99.99 € Puff Puff Palace FR 99.99 € Puff Puff Palace NL 99.99 €
Last updated: 23/09/2026, 5:44 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Induction |
| Device Type | Portable |
| Brand | Cuboo |
| Power Source | Battery |
| Weight | 277 g |
| Dimensions | 11.0 x 6.3 x 2.3 cm |
| Auto Shutoff | 10 min |
| Warranty | 1 year |
| Session Mode | On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Metal |
| Battery Type | 18650 Li-Ion 18650-Akkus vergleichen |
| Battery Count | 2 |
| Replaceable Battery | Yes |
| Charging Port | USB-C |
Source: OfficialOfficial, OfficialOfficial · Verified 20.02.2026
About this vaporizer
The Cuboo Heater Pro V2 by Cuboo is not a standalone vaporizer, but an induction heating device for butane gas vaporizers such as the DynaVap or Anvil (not for the Dani Fusion and Tempest). Instead of a flame, an induction coil generates an electromagnetic field that brings the metal cap of the respective device to operating temperature within seconds — reproducibly, safely, and without an open flame.
The Pro V2 delivers between 30 and 60 watts (briefly 70 W boost), and the timer is freely adjustable from 10 to 60 seconds. A display shows the wattage, timer, and the charge level of each of the two swappable 18650 batteries individually. The device charges via USB-C; the cells charge via USB-C in the device. With approximately 30 heating cycles per charge, a single battery charge is sufficient for an extended session. Current prices from multiple shops can be found in the price comparison for the Cuboo Heater Pro V2.
- Induction heating for even, clean heat.
- Heavy at 277 g.
- No dosing caps.
- No app.
The Cuboo Heater Pro V2 by Cuboo is not a standalone vaporizer, but an induction heating device for butane gas vaporizers such as the DynaVap or Anvil (not for the Dani Fusion and Tempest). Instead of a flame, an induction coil generates an electromagnetic field that brings the metal cap of the respective device to operating temperature within seconds — reproducibly, safely, and without an open flame.
The Pro V2 delivers between 30 and 60 watts (briefly 70 W boost), and the timer is freely adjustable from 10 to 60 seconds. A display shows the wattage, timer, and the charge level of each of the two swappable 18650 batteries individually. The device charges via USB-C; the cells charge via USB-C in the device. With approximately 30 heating cycles per charge, a single battery charge is sufficient for an extended session. Current prices from multiple shops can be found in the price comparison for the Cuboo Heater Pro V2.
See also: Cuboo Induction Heater XL · Cuboo Stick · Fazer · VaGo
Induction Heating Instead of a Flame
The core idea behind the Cuboo Heater Pro V2 is straightforward: butane gas vaporizers such as the DynaVap M or the Anvil by Vestratto are traditionally heated with a torch lighter. This requires practice, is sensitive to wind, and delivers inconsistent results depending on technique. An induction coil resolves all of that: the device simply slots into the opening of the heater, and an electromagnet heats the metal cap evenly within a few seconds — always consistent, always repeatable.
The technology is the same as that used in induction hobs in the kitchen, just smaller and tailored to the requirements of vaporizer caps. There is no flame, no butane gas refill, and no fire risk. This makes the Cuboo Heater Pro V2 particularly well suited to everyday use — including indoors.
Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporization at controlled temperatures releases over 95 % of the desired active compounds, while combustion by-products are largely avoided. Source: PubMed 16637053
Wattage, Timer, and Display
The Pro V2 operates with an adjustable wattage of 30 to 60 watts, with up to 70 W boost available briefly. Lower wattage is suited to slower, more even heating; higher values bring the cap to temperature more quickly and are suited to shorter, more intense hits.
The timer is freely adjustable between 10 and 60 seconds. This makes every heating cycle reproducible: once you have found your optimal combination of watts and seconds, you can recall it at any time. The display shows the wattage, timer countdown, and the battery level of both 18650 cells separately — no guessing which battery is weaker.
Swappable 18650 Batteries and USB-C
Two standard 18650 battery cells power the Cuboo Heater Pro V2. 18650 cells are a worldwide standard — they are found in laptops, torches, and countless other devices. This means cells are available everywhere, can be swapped yourself, and make the device long-lasting. No built-in batteries, no sending the device back to the manufacturer when capacity diminishes.
Charging is via USB-C. Cuboo does not specify whether the device can be used while charging. A freshly charged battery delivers around 30 heating cycles — enough for many sessions in a day before needing to plug in again.
Compatibility and Water Pipe Use
The Cuboo Heater Pro V2 works with any vaporizer that is compatible with a standard induction cap: DynaVap M, M+, B, Omni, Anvil (Vestratto), and further models (not the Dani Fusion and Tempest) with suitable metal caps. A strong neodymium magnet holds the inserted device securely in position without needing to hold it in place.
The device is WPA-compatible: if you draw your DynaVap through a water glass or bong, you can use the Cuboo Heater Pro V2 for that purpose. The inner glass insert is replaceable if needed — handy if it fogs up or gets damaged through frequent use.
Who Is the Cuboo Heater Pro V2 For?
Anyone who already owns a DynaVap or another induction-compatible vaporizer and wants to get rid of their dependence on butane gas will find a well-thought-out solution in the Cuboo Heater Pro V2. No lighter, no refilling, no open flame indoors — instead, a precise, repeatable heating process at the press of a button.
The heater is aimed at users who want more control over their sessions than a torch allows. The swappable batteries and replaceable glass insert make it a long-lasting companion. Cuboo's 1-year warranty is included. Other devices from the brand can be found on the Cuboo manufacturer page.
Similar Vaporizers 4
Spec comparison
| Cuboo Heater Pro V2 | Cuboo Induction Heater XL | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Induction | Induction |
| Temperature | N/A | N/A |
| Heat-up time | N/A | N/A |
| Battery | N/A | N/A |
| Price from | N/A | N/A |
| Cuboo Heater Pro V2 | Fazer | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Induction | Hybrid |
| Temperature | N/A | 205°C |
| Heat-up time | N/A | 30s |
| Battery | N/A | 1800 mAh |
| Price from | N/A | N/A |
Compatible Accessories
Other Accessories
10
Yes, the Cuboo Heater Pro V2 is compatible with all DynaVap models that have a standard induction cap — including the M, M+, B, Omni, and others. The Anvil (Vestratto) also works; Cuboo explicitly excludes the Dani Fusion and Tempest.
With two fully charged 18650 cells, the Cuboo Heater Pro V2 delivers around 30 heating cycles. For most users, that is comfortably enough for a full day or a longer session.
All standard 18650 cells will fit. High-quality cells with a high discharge rate are recommended (e.g. Sony VTC5A or Samsung 30Q). Cheap no-name cells can reduce performance and are not recommended for safety reasons.
Cuboo does not specify whether the device can be used while charging. You can charge the Cuboo Heater Pro V2 via USB-C and use it at the same time.
This depends on the vaporizer used and personal preference. A good starting point for DynaVap is around 40–50 W at 20–25 seconds. From there you can fine-tune: more watts or more time for more intense hits, less for gentler, more aromatic draws.
Yes. You can draw your DynaVap or compatible vaporizer through a water pipe attachment (WPA) and use the Cuboo Heater Pro V2 for heating. This is particularly popular for cooler draws.
Induction heating is more precise and repeatable than a flame. No wind, no fluctuating heating results, no butane gas refills. The metallic butane aftertaste that some users find off-putting is also eliminated.
1 year manufacturer's warranty from Cuboo.
Yes, the inner glass insert can be replaced. This is handy when it fogs up from condensation or gets damaged through frequent use.
Yes. The Cuboo Heater Pro V2 is an accessory and not a standalone vaporizer. It electronically heats induction-compatible devices such as the DynaVap or Anvil (not the Dani Fusion and Tempest), but does not replace a device with its own filling chamber.
Comments
No comments yet. Be the first!
Sign in to comment