Puffco Pro 2
Pros
- Four temperature levels
- Replaceable coil
- Puffco quality
Cons
- Coils need regular replacement
- Pricier than generic wax pens
No prices currently available
This product has been discontinued and is currently not available in any shop.
View alternatives →Specifications
| Specifications | |
|---|---|
| Heating Method | Conduction |
| Device Type | Pen |
| Brand | Puffco |
| Power Source | Battery |
| Temperature Range | 304°C - 382°C |
| Battery Capacity | 430 mAh |
| Dimensions | 12.5 x 119 mm |
| Power Consumption | 9 W |
| Warranty | 1 year |
| Session Mode | Session & On-Demand |
| Temperature Control | Presets |
| Material | Concentrates |
| Vapor Path | Ceramic |
| Battery Type | Internal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | proprietary |
| Atomizer Type | Ceramic chamber with Kanthal c |
| Coil Material | Kanthal |
| Thread Type | 510 |
| Release Year | 2017 |
| MSRP | $89.99 |
| Status | Discontinued |
Source: OfficialOfficial, PuffcoOfficial, TVapeRetailer · Verified 18.02.2026
About this vaporizer
The Puffco Pro 2 (2017) is a stainless steel coil dab pen: ceramic chamber with Kanthal heating coil, 430 mAh battery, three heat settings at roughly 304, 343 and 382 °C and a 12-second Sesh Mode. At 12.5 mm in diameter it was Puffco’s smallest pen. It has not been carried in the manufacturer’s shop since 2019 at the latest; Puffco keeps the support page with manual online, while the spec sheet…
- Four temperature levels
- Replaceable coil
- Puffco quality
- Coils need regular replacement
- Pricier than generic wax pens
It has not been carried in the manufacturer’s shop since 2019 at the latest; Puffco keeps the support page with manual online, while the spec sheet in the help center has been deleted.
The Pro 2 is the counterpart to the coil-less Plus: coil instead of ceramic surface, denser clouds instead of maximum flavor. Its parts do not fit the Plus, and replacement atomizers only exist as leftover stock – a pen for owners with a parts supply, not for newcomers.
See also: Pivot · Peak · Peak Pro V2 Pearl · Peak Pro V2 Onyx
Key facts
- Second generation of the Puffco Pro; product page archived at puffco.com from February 2017 (Puffco)
- Coil-based: ceramic chamber with Kanthal heating coil, air path free of plastics and glue (Puffco)
- 430 mAh battery, 9 W max, fully charged in about 1 hour on the screw-on USB charger (Puffco)
- Three settings: Green approx. 580 °F, Blue approx. 650 °F, White approx. 720 °F – 304, 343 and 382 °C (Puffco)
- Sesh Mode: two clicks, 12 seconds of continuous heating – inherited from the Plus (Puffco)
- Stainless steel body, 12.5 × 119 mm; chamber 11.5 × 13.5 mm (Puffco)
- In the box: pen, hard case, USB charger, loading tool, instructions (Puffco)
- Warranty 1 year, excluding used atomizers (Puffco manual)
Verified technical data
| Type | Coil dab pen for concentrates, 510 thread (Puffco; test: DabConnection) |
|---|---|
| Release year | 2017 – product page first archived Feb 23, 2017 (Puffco) |
| Heating | Ceramic chamber with Kanthal heating element, conduction (Puffco) |
| Heat settings | Green ~580 °F / Blue ~650 °F / White ~720 °F, “approximate” (Puffco) |
| Sesh Mode | 12 seconds (Puffco) |
| Battery | 430 mAh lithium-ion, 9 W max, built in (Puffco) |
| Runtime | “up to 100 uses per charge” – manufacturer claim 2017 (Puffco) |
| Charging | USB charger with 510 thread, DC 4.2 V / 420 mA, approx. 1 h (Puffco) |
| Dimensions | 12.5 × 119 mm; battery 12.5 × 76 mm; chamber 11.5 × 13.5 mm (Puffco) |
| Weight | not published by Puffco |
| Material | Stainless steel; food-safe silicone splash guard (Puffco) |
| Warranty | 1 year, not on used atomizers (Puffco) |
| List price | 89.99 US dollars (2017) (Puffco) |
Generations and variants
The Pro 2 follows the Puffco Pro, the brand’s coil-based first pen, which High Times named “Best Vape Pen”. Puffco describes the Pro 2 as the same pen in a smaller, more portable form: stainless steel instead of the predecessor’s body, a press-on instead of threaded mouthpiece, a shock-absorbing silicone base and a removable splash guard. Sesh Mode, previously exclusive to the Plus, was new as well.
Puffco has documented no color variants or special editions of the Pro 2. Accessory handles such as replacement atomizers, battery and charger appear in the archive until 2019. The Pro 2 is not related to the Plus – the parts are not compatible; only Pro coils run on a Plus battery, according to Puffco.
Heating system: ceramic chamber with Kanthal coil
Unlike the coil-less Plus, the Pro 2 uses a classic heating coil: Puffco lists a Kanthal heating element inside a chamber made entirely of ceramic, with an air path free of plastics and glue. DabConnection found a ceramic rod wrapped four times with wire in its test unit – a single-coil atomizer.
At 11.5 × 13.5 mm the chamber is small and tapered, which according to Puffco minimizes waste and eases cleaning. When loading, the manual explicitly warns not to damage the coil with the tool; the support page advises loading only small balls of concentrate. Atomizers last two to three months per Puffco and can be burned clean in Sesh Mode – carefully, since that creates a lot of heat.
Heat settings, Sesh Mode and operation
Five clicks lock or unlock the pen, four clicks change the setting, two clicks start Sesh Mode, holding heats manually and shuts off after 8 seconds. The LED shows the settings as Green (low, approx. 580 °F), Blue (medium, approx. 650 °F) and White (high, approx. 720 °F) – Puffco explicitly calls the values “approximate”.
Sesh Mode delivers 12 seconds of continuous heating without holding the button; DabConnection warns that on Blue and White this produces a lot of vapor. Puffco advises holding the pen upright, because the concentrate drips from the dart into the chamber by gravity – held at an angle it does not work properly.
How Do I Charge the Battery Properly?
The built-in battery has 430 mAh and delivers a maximum of 9 W. In 2017 Puffco promised “up to 100 uses per charge” – a marketing figure for short draws that no review has verified. Charging works like on the Plus via a USB charger with 510 thread: unscrew the battery, screw it on, red means charging, green means full. Puffco quotes about one hour; the charger delivers 4.2 V at 420 mA.
There is no port on the pen, so charging during use is impossible. DabConnection criticized in 2017 that the case only holds the disassembled pen and the atomizer has to be unscrewed for every charge.
In the box and spare parts
According to the 2017 product page the box held the pen, a shock-resistant hard case, the USB charger, a loading tool and the instructions. The manual lists the parts as mouthpiece, splash guard, atomizer, battery, charger and tool.
Puffco sold replacement atomizers and coils separately until about 2019; today only leftover stock remains at retailers. Anyone using a Pro 2 should stock atomizers – without an intact coil the pen is useless, and Plus chambers do not fit.
Warranty and status
The manual states a one-year manufacturer’s warranty excluding used atomizers; Puffco’s general warranty covers only the electronic base and battery, not wear or coils. Proof of purchase and a purchase from an authorized dealer are required.
The Pro 2 has not been listed at puffco.com since 2019; the product page returns 404, it is missing from the current catalog, and Puffco has deleted the spec article in its help center. There is no formal discontinuation statement, but the support page with video and manual PDF stays online. Anyone buying today buys leftover stock without a reliable parts supply.
Who it suits and alternatives
The Pro 2 is aimed at users who want dense clouds from a very small pen and can live with coil replacements. For flavor, the Puffco Plus was already the better choice in 2017 – DabConnection called it Puffco’s best dab pen.
Anyone starting with Puffco today will find no coil pen in the range: the Plus (until 2025) and the Pivot with 3D Chamber are the successors in pen format. A Pro 2 is only worth it with replacement atomizers included.
More Puffco Vaporizers 4
Spec comparison
| Puffco Pro 2 | Peak | |
|---|---|---|
| Type | Vape Pen | Portable |
| Heating | Conduction | Conduction |
| Temperature | 304°C - 382°C | 254°C - 310°C |
| Heat-up time | N/A | 25s |
| Battery | 430 mAh | N/A |
| Price from | N/A | 165.74€ · incl. shipping |
| Puffco Pro 2 | Peak Pro | |
|---|---|---|
| Type | Vape Pen | Portable |
| Heating | Conduction | Conduction |
| Temperature | 304°C - 382°C | 204°C - 340°C |
| Heat-up time | N/A | 20s |
| Battery | 430 mAh | 1700 mAh |
| Price from | N/A | 348.94€ · incl. shipping |
Compatible Accessories
There is no official statement, but the Pro 2 has not been listed at puffco.com since 2019, the product page is gone, and the spec sheet in the help center no longer exists either. Only the support page with manual remains online.
Yes. Unlike the coil-less Plus, the Pro 2 uses a Kanthal heating element inside a ceramic chamber. Puffco describes it as a traditional coil-based system.
Puffco gives approximate values: Green 580 °F, Blue 650 °F, White 720 °F – about 304, 343 and 382 °C. Four clicks change the setting.
No. The Pro 2 is operated with one button: five clicks on/off, four clicks heat setting, two clicks Sesh Mode. Puffco offers app control only on the Peak Pro and Proxy.
Unscrew the battery from the atomizer and screw it onto the 510-thread USB charger. Red means charging, green means full; Puffco quotes about one hour. There is no charging port on the pen.
No, the systems are not compatible. The only exception per Puffco: Pro coils can run on a Plus battery, but not the other way round.







Comments
No comments yet. Be the first!
Sign in to comment