Pros
- 160-230°C range for herbs.
- Induction heating for even, clean heat.
- Huge 6000 mAh battery.
- On-demand with about 30 s heatup.
- Water pipe compatible; pass-through supported.
Cons
- Heavy at 277 g.
- No dosing caps.
- No app.
Price Comparison (7 shops) 95–152 €
Last updated: 28/03/2026, 6:08 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Heating Method | Induction |
| Device Type | Desktop |
| Brand | Cuboo |
| Power Source | Battery |
| Heat-up Time | 8 seconds |
| Battery Capacity | 6000 mAh |
| Weight | 220 g |
| Warranty | 1 years |
| Water Pipe | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Metal |
| Battery Type | 18650 Li-Ion |
| Replaceable Battery | Yes |
| Passthrough Charging | Yes |
| Charging Port | USB-C |
Source: OfficialOfficial, OfficialOfficial · Verified 20.02.2026
About this vaporizer
The Cuboo Heater Pro V2 is an induction heater built for DynaVap-compatible tips — part of the growing category of dedicated IH devices that replace the butane lighter ritual with precise, repeatable induction heating. The headline spec is the 6000mAh battery, which is genuinely exceptional for this category and sets the Heater Pro V2 apart from most competitors.
With 6000mAh on board, you are looking at an extended number of sessions before needing a charge. Most IH devices with smaller batteries become a charging concern during long sessions or events. The Heater Pro V2 sidesteps that problem almost entirely. Passthrough charging is also supported, so the device remains usable while it tops up.
Heat-up time is around 8 seconds — on par with a confident torch technique, but without the variability. The main practical advantage of induction over butane is consistency: the same tip heated the same way gives the same result every time. Once you dial in the settings for a particular tip and temperature preference, the experience becomes highly reproducible. For DynaVap enthusiasts who take their setup seriously, this level of fine-tuning is genuinely useful. Different tip designs — titanium versus stainless steel, for instance — respond differently to induction, and being able to adjust for that makes a measurable difference in the session.
Water pipe compatibility means the Heater Pro V2 connects to a bubbler or bong for filtered vapor. The combination of a DynaVap tip, an induction heater, and a water pipe is a high-performance setup that many enthusiasts consider the pinnacle of portable vaporizing. One-year warranty. The build quality reflects the product positioning well.
- 160-230°C range for herbs.
- Induction heating for even, clean heat.
- Huge 6000 mAh battery.
- On-demand with about 30 s heatup.
- Water pipe compatible; pass-through supported.
- Heavy at 277 g.
- No dosing caps.
- No app.
The Cuboo Heater Pro V2 by Cuboo is not a standalone vaporizer — it is an induction heater designed to power butane-cap vaporizers like DynaVap, Anvil, and Dani electronically. Instead of a torch flame, an electromagnetic coil heats the metal cap of your device in seconds, consistently and without open fire.
The Pro V2 delivers 30 to 60 watts continuously (70 W short boost), with a freely adjustable timer from 10 to 60 seconds. A display shows wattage, timer, and the charge level of each of the two replaceable 18650 cells individually. USB-C charging with passthrough support keeps you going, and roughly 30 heating cycles per charge cover a full day of use. Current prices from multiple shops are available in the Cuboo Heater Pro V2 price comparison.
See also: Fazer · Cuboo Stick · VaGo · Cuboo Induction Heater XL
Induction heating instead of a torch
The idea behind the Cuboo Heater Pro V2 is straightforward: butane-cap vaporizers like the DynaVap M or the Anvil by Vestratto are traditionally heated with a torch lighter. That requires practice, is sensitive to wind, and produces inconsistent results depending on technique. An induction coil solves all of that: place your device in the heater opening, and an electromagnet heats the metal cap evenly in seconds — the same result every single time.
The technology is the same as induction cooking, just scaled down and tailored to vaporizer caps. No flame, no butane refills, no fire hazard. That makes the Cuboo Heater Pro V2 a practical choice for indoor use too.
Power, timer, and display
The Pro V2 operates at an adjustable power level of 30 to 60 watts, with a brief 70 W boost available. Lower wattage means slower, more gradual heating; higher wattage brings the cap up to temperature faster for shorter, more intense hits.
The timer is adjustable between 10 and 60 seconds, making every heat cycle repeatable: once you find your ideal watt and second combination, you can dial it in every time. The display shows wattage, timer countdown, and the charge level of each 18650 cell separately — no guesswork about which cell is running low.
Replaceable 18650 batteries and USB-C
Two standard 18650 cells power the Cuboo Heater Pro V2. 18650 is a widely used battery format found in laptops, flashlights, and countless other devices. That means cells are easy to source, user-replaceable, and make the device genuinely long-lasting. No built-in packs, no sending the unit back when capacity drops.
Charging is via USB-C with passthrough support, so the heater can be used while plugged in. A full charge delivers around 30 heating cycles — enough for a full day of sessions before you need to recharge.
Compatibility and water pipe use
The Cuboo Heater Pro V2 works with any vaporizer that uses an induction-compatible cap: DynaVap M, M+, B, Omni, Anvil by Vestratto, Dani, and other models with matching metal caps. A strong neodymium magnet holds the inserted device securely in place without having to hold it manually.
The unit is WPA-compatible: users who run their DynaVap through a water piece can use the Cuboo Heater Pro V2 for that purpose. The inner glass section is replaceable if it becomes cloudy or damaged through regular use.
Who is the Cuboo Heater Pro V2 for?
Anyone who already owns a DynaVap or another induction-compatible vaporizer and wants to move away from torch lighters will find the Cuboo Heater Pro V2 a clean solution. No lighter fluid, no refilling, no open flame indoors — just a precise, repeatable heat cycle at the press of a button.
The heater suits users who want more control over their sessions than a torch allows. Replaceable batteries and a swappable glass insert make it built to last. It comes with a 1-year warranty from Cuboo. Other products from the brand are on the Cuboo brand page.
Comments
No comments yet. Be the first!
Sign in to comment