Storz & Bickel Mighty+
Pros
- Hybrid heating (convection + conduction) for flexible vapor quality
- 60-second heat-up time, temperature up to 210°C
- Passthrough charging enables use while charging
- 16 dosing capsules included for easy portioning
Cons
- Non-replaceable battery with limited lifespan
- 242g weight, heavier than compact models
- App control optional, device doesn't require it
Price Comparison (138 shops) 156–608 €
Last updated: 30/03/2026, 2:48 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Heating Method | Hybrid |
| Device Type | Portable |
| Brand | Storz & Bickel |
| Power Source | Battery |
| Temperature Range | 40°C - 210°C |
| Heat-up Time | 60 seconds |
| Battery Capacity | 3300 mAh |
| Weight | 242 g |
| Dimensions | 8.0 x 14.0 x 3.0 cm |
| Auto Shutoff | 1 min |
| Certifications | UL 8139, IEC 60335-1 |
| Warranty | 2 years |
| App Control | Yes |
| Dosing Capsules | View dosing capsules |
| Water Pipe | View water pipe adapters |
| Session Mode | Session |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Plastic |
| Battery Type | Internal |
| Battery Count | 2 |
| Replaceable Battery | No |
| Passthrough Charging | Yes |
| Charging Port | usb-c |
| MSRP | 470 € |
Source: OfficialOfficial, OfficialOfficial · Verified 24.02.2026
How to Use - Getting Started for the Mighty+. You can find the complete overview on the main page.
How to Use - Getting Started
The Mighty+ by Storz & Bickel uses hybrid heating - a mix of conduction and convection - to deliver consistent vapor from start to finish. USB-C charging, dosing capsules, and app control make it straightforward to get started.
1. First Charge
Plug in the included USB-C cable. The 3300 mAh battery takes about 80 minutes for a full charge. The LED ring around the power button shows battery level - all three LEDs lit means fully charged. You can vape while charging too (passthrough charging).
2. Load the Chamber
Twist the cooling unit counter-clockwise to remove it. Grind your herbs medium-fine and fill about 0.15 g into the chamber, or pop in a dosing capsule for mess-free loading and quick swaps. Don't pack it tight - air needs to flow through. Snap the cooling unit back on.
3. Set Your Temperature
Hold the power button for 3 seconds. The display shows current and target temps. The Mighty+ reaches your set temperature in about 60 seconds. Here's where to start:
- 180 °C / 356 °F - Pure flavor, light vapor
- 190 °C / 374 °F - Balanced - good taste with solid clouds
- 200 °C / 392 °F - Thick clouds, less flavor
- 210 °C / 410 °F - Max extraction
The Storz & Bickel app lets you activate the booster function, which adds 15 °C at the end of a session for full extraction.
4. Draw Technique
Take slow, steady pulls for 10-15 seconds. Fast, hard draws actually produce less vapor because air rushes past the heater too quickly. A session lasts roughly 5 minutes. After 2 minutes of no use, the Mighty+ shuts off automatically.
5. After Your Session
Hold the power button for 3 seconds to turn it off. Let it cool for a minute, then twist off the cooling unit and tap the chamber out over a container. Brush out the chamber with the included brush. Once a week, soak the cooling unit in isopropyl alcohol - this keeps airflow open and flavor clean.
5 Common Beginner Mistakes
- Packing too tight - Blocks airflow and kills vapor production. A loose fill works best.
- Jumping straight to max temp - At 210 °C your first hit tastes harsh. Start at 180 °C and work up.
- Skipping cooling unit cleaning - Resin builds up after 5-10 sessions. Clogged airflow means weak draws and bad flavor.
- Drawing too fast - Slow pulls give the heater time to work. Patience pays off with bigger clouds.
- Ignoring dosing capsules - They keep the chamber spotless and make reloading on the go a breeze.
Direct comparisons
More Mighty+ topics
- Cleaning & Care
- Battery Charging Tips
- Temperature Settings
- Airflow & Draw Technique
- Herb Prep & Grind
- Dosing Capsule Guide
- Tips for Dense Vapor
- Reduce Smell
- Microdosing
- Session vs On-Demand
- Troubleshooting & Error Messages
- Efficiency: Vape Economically
- Travel Setup
- Accessory Overview
- Clean & Replace Cooling Unit
- Mouthpiece Comparison
- Replace Screens & O-Rings
- Best Dosing Capsules
- Frequently Asked Questions (FAQ)
- Warranty & Repair
- Lifespan & Maintenance Plan
- Review & Long-Term Test
- Updates: Firmware & App
- Safety & Materials
- Mighty+ vs Venty
- Mighty+ vs Tinymight 2
- Mighty+ vs Crafty+
- Mighty+ vs Fenix Neo
- Mighty+ vs Dynavap
- Mighty+ Alternatives
Mighty+ Guides & Nischen
- Cleaning & Care
- Battery Charging Tips
- Temperature Settings
- Airflow & Draw Technique
- Herb Prep & Grind
- Dosing Capsule Guide
- How to Use — Getting Started
- Tips for Dense Vapor
- Reduce Smell
- Microdosing
- Session vs On-Demand
- Troubleshooting & Error Messages
- Efficiency: Vape Economically
- Travel Setup
- Accessory Overview
- Clean & Replace Cooling Unit
- Mouthpiece Comparison
- Replace Screens & O-Rings
- Best Dosing Capsules
- Frequently Asked Questions (FAQ)
- Warranty & Repair
- Lifespan & Maintenance Plan
- Review & Long-Term Test
- Updates: Firmware & App
- Safety & Materials
- Mighty+ vs Venty
- Mighty+ vs Tinymight 2
- Mighty+ vs Crafty+
- Mighty+ vs Fenix Neo
- Mighty+ vs Dynavap
- Mighty+ Alternatives
More Storz & Bickel Vaporizers 4
Similar Vaporizers 6
Head-to-Head Comparisons 10
Compatible Accessories
Adapters
6
Replacement Parts
1Other Accessories
13
Adapters
5
Replacement Parts
1Other Accessories
5Variants & Editions
Starter Bundles
















Comments
No comments yet. Be the first!
Sign in to comment