Battery-Free Ganz The Flare V2
Pros
- Induction heating for DynaVap caps.
- On-demand in 8 s, no lighter needed.
- Water pipe compatible.
- Mains powered for endless sessions.
- Compact at just 200 g.
Cons
- Needs outlet, no battery.
- Only for DynaVap-compatible caps.
- No app and no dosing caps.
Price Comparison (6 shops) 95–170 €
Last updated: 28/03/2026, 11:32 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Heating Method | Induction |
| Device Type | Desktop |
| Brand | Battery-Free Ganz |
| Power Source | AC Power |
| Heat-up Time | 30 seconds |
| Weight | 217 g |
| Warranty | 2 years |
| Water Pipe | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Metal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | AC |
Source: OfficialOfficial, VerdampftNochMalRetailer · Verified 19.02.2026
About this vaporizer
The Battery-Free Ganz Flare V2 is a desktop induction heater purpose-built for DynaVap devices. Induction heating works by generating an electromagnetic field that heats the metal DynaVap tip directly without any flame or physical contact between heater and device. The practical benefit over torch heating is consistency: every heat cycle produces the same result, and the DynaVap click system continues to function as the temperature indicator you already trust.
As a desktop unit, the Flare V2 draws power from the wall rather than a battery. That is the right trade-off for home use: no butane to keep stocked, no lighter technique to master, no variation in how evenly the tip heats depending on how steadily you hold the torch. Heat-up to session-ready temperature takes around 30 seconds; the maximum temperature reaches 230°C, slightly above what many portable competitors offer.
Water pipe compatibility is standard, and for stationary home sessions the combination of induction precision and water cooling produces a notably refined experience. The electromagnetic heating reaches the DynaVap tip more evenly than a handheld flame, meaning the first draw is better, the second draw is consistent with the first, and the whole session produces less variation than you are used to with butane.
Two-year warranty from Battery-Free Ganz. The Flare V2 addresses a specific need – DynaVap users who want to enjoy their existing devices at home with electric precision – and it addresses it convincingly. If you own a DynaVap and spend meaningful time using it at home, the Flare V2 is worth serious consideration.
- Induction heating for DynaVap caps.
- On-demand in 8 s, no lighter needed.
- Water pipe compatible.
- Mains powered for endless sessions.
- Compact at just 200 g.
- Needs outlet, no battery.
- Only for DynaVap-compatible caps.
- No app and no dosing caps.
The BFG The Flare V2 from BFG is a butane-powered portable vaporizer with convection heating and an all-glass vapor path. A jet flame lighter heats the glass bowl from the outside -- hot air flows through the material without touching it. The V2 update brings improvements to airflow and glass quality over the first version.
BFG specializes in handcrafted butane vaporizers with pure glass vapor paths. With 3 shops in the price comparison, the Flare V2 is available across Europe.
Convection via Butane Flame
The Flare V2 uses pure convection: a jet flame lighter (not included) heats the outside of the glass bowl. Heat penetrates the glass and warms the air inside, which then flows through the plant material. There is no direct contact between flame and material.
Temperature is controlled by the distance of the flame from the glass and heating duration. Closer and longer means higher temperatures, farther and shorter means lower. This takes practice but offers fine control over vapor quality.
Compared to battery-powered convection vaporizers, the Flare V2 is independent of electricity. As long as butane gas is available, the device works anywhere. Convection performance is comparable to electric devices in the same price range.
Glass-on-Glass Vapor Path
The entire vapor path of the Flare V2 is borosilicate glass. The herb chamber, vapor channel, and mouthpiece are glass -- no metal, no plastic touches the vapor. Glass is flavor-neutral and easy to clean.
The ground glass joint connection provides an airtight seal without O-rings. Joints are standardized at 14 mm or 18 mm -- this allows the Flare V2 to connect directly to a water pipe.
The downside of glass: it breaks. The Flare V2 is more of a portable tabletop vaporizer than a pocket device. A padded carrying case is recommended for transport.
V2 Improvements
The V2 version brings several upgrades over the original: improved airflow for less draw resistance, higher glass quality (thicker borosilicate), and a chamber design that distributes air more evenly.
The mouthpiece has been redesigned to cool vapor more effectively. The ground glass joints fit tighter, preventing accidental separation. Overall, the V2 feels more refined than its predecessor.
In the box: Flare V2 glass body (multi-piece), cleaning accessories, and a flame technique guide. A jet flame lighter is not included and must be sourced separately. BFG recommends a single jet flame (not triple) for better temperature control.
3 Shops in the Price Comparison
The BFG Flare V2 is listed in 3 shops on vapochecker.com. As a handcrafted glass vaporizer, pricing sits in the mid range.
Butane vaporizer types compared:
| Feature | BFG Flare V2 | DynaVap | Sticky Brick |
|---|---|---|---|
| Heating | Convection (Glass) | Conduction (Metal) | Convection (Wood) |
| Vapor Path | 100% Glass | Metal/Glass | Wood/Glass |
| Temp Control | Flame distance | Click system | Flame distance |
Anyone seeking a butane vaporizer with a pure glass vapor path and convection heating will find the Flare V2 a unique option. The price comparison across 3 shops shows the best deal.
Comments
No comments yet. Be the first!
Sign in to comment