Pros
- Large heater matrix plus XL bowl for fast, one-hit extraction.
- Titanium/SS build with cooling fins and 14 mm taper.
- Very fast with induction heater pairing.
- Modular 8 mm system with replaceable screen/inserts.
Cons
- O-ring fit issues reported after cleaning.
- Included torch may be too weak; users recommend stronger torch.
- Needs technique/torch selection to heat properly.
Price Comparison (6 shops)
Last updated: 28/03/2026, 3:08 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Heating Method | Convection |
| Device Type | Butane Vaporizer |
| Brand | Camouflet |
| Power Source | Butane |
| Heat-up Time | 5 seconds |
| Weight | 27 g |
| Dimensions | 11.9 x 1.9 x 1.9 cm |
| Warranty | 2 years |
| Water Pipe | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Ceramic |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | none |
| MSRP | 131 € |
Source: CamoufletOfficial, OfficialOfficial, OfficialOfficial, OfficialOfficial, Planet of the VapesRetailer · Verified 20.02.2026
About this vaporizer
The Camouflet Convector XL is the larger sibling of the popular Convector, made by Camouflet — a small Canadian outfit that has carved out a dedicated following with their butane convection vaporizers. The XL version expands the herb chamber for bigger loads and longer sessions while keeping the same clean convection mechanism that made the original popular.
Heating works entirely by convection, powered by a standard butane lighter. You ignite the lighter, draw air through the device, and hot air passes over the herb without direct contact with the heat source. Between pulls, the system cools down, so the herb is not sitting against a hot surface baking away. This on-demand nature is one of the genuine advantages of butane convection — you are in control of when heating happens, not the device.
Heat-up is nearly instant once the lighter is lit. Operating temperature sits around 220°C. The device connects to water pipes, and this is genuinely the intended use case — Camouflet designed the XL with water filtration in mind, and the combination of butane convection vapor and water filtration is a setup that has earned real devotion among enthusiasts. The vapor is smooth, flavorful, and the session has a tactile engagement that battery-powered devices rarely match.
Two-year warranty from Camouflet. The build quality reflects the maker's craft-oriented approach — solid materials, thoughtful geometry, no unnecessary plastic. This is not a mass-market product, and the price reflects that. For someone who specifically wants butane convection with water pipe compatibility and a larger chamber, the Convector XL is difficult to beat in its category.
The one practical trade-off versus an electric portable is butane dependency. You need a lighter and butane wherever you use it. For most people this is a non-issue, but it is worth knowing going in.
- Large heater matrix plus XL bowl for fast, one-hit extraction.
- Titanium/SS build with cooling fins and 14 mm taper.
- Very fast with induction heater pairing.
- Modular 8 mm system with replaceable screen/inserts.
- O-ring fit issues reported after cleaning.
- Included torch may be too weak; users recommend stronger torch.
- Needs technique/torch selection to heat properly.
The Camouflet Convector XL is the larger version of the Convector - a butane-powered convection vaporizer handmade in Canada. The bigger chamber holds more material than the standard Convector, making it better suited for longer sessions or sharing with others. The build relies on a titanium tip, a hardwood body, and a glass vapour path. A 14 mm WPA adapter is built in, so the device fits directly onto a water piece. Dosing capsules are supported. Despite the larger chamber, the XL stays compact enough for a pocket. Since it runs on butane, there is no need for electricity or batteries. Our price comparison shows current prices for the Convector XL.
See also: Camouflet Injector · Camouflet Ceramo XL · Zooter · Camouflet Inductor
Bigger Chamber vs Standard
The main difference from the regular Convector is chamber volume. The XL holds noticeably more material, allowing longer draws and more productive sessions. Solo users get multiple draws from a single load. Group sessions require less refilling. The chamber sits in the glass section and is easy to load. Dosing capsules keep things clean and speed up the swap between sessions.
Craft Quality and Materials
Each Convector XL is built individually at Camouflet in Canada. The body is selected hardwood - different wood species are available depending on the batch. The titanium tip is heated by a butane lighter and transfers warmth to the passing air. The vapour path is glass, keeping flavour clean. No plastic in the airflow. The build is sturdy enough for daily transport.
WPA Use and Daily Life
The built-in 14 mm WPA adapter eliminates the need for extra accessories for water filtration. Place the XL directly on a water piece and inhale through water - cooler, softer vapour. On the go, it works just as well without water. Since butane is the only energy source, there is no dependence on charge levels or outlets. A good single-flame lighter is enough. Heat-up time is a matter of seconds.
Butane Convection: No Battery Needed
The Convector XL runs on butane convection -- a lighter heats the air flowing through the herbs. No battery, no electronics, no charging. It works anywhere a jet flame lighter sparks.
Temperature control comes from flame position and draw technique. Closer to the chamber means hotter, further away means cooler. Takes some practice, but offers flexibility no electronic device can match. Experienced users appreciate this manual control.
XL Chamber for Bigger Loads
Compared to smaller Sticky Brick models, the Convector XL holds a larger herb chamber. This means longer sessions or stronger single draws without reloading. The chamber is made from wood and glass -- materials that don't affect flavor.
Fill amount is flexible. Half-fill for solo sessions, full load for groups. Coarse grind works better than fine, allowing air to flow freely through the material.
Water Pipe Use
The Convector XL is designed for water pipes from the start. The XL format fits 18mm joints directly; adapters exist for 14mm. Water filtration makes the already smooth convection vapor even cooler and gentler.
Butane convection plus water produces thick, flavorful clouds. First-time water users are often surprised how smooth draws become. Coughing drops noticeably -- even at higher temperatures.
XL Chamber vs Standard Convector
The Convector XL uses a wider chamber compared to the standard Convector model, holding roughly 50% more herb per load. This extra capacity suits users who prefer longer sessions or sharing with a second person without needing to repack. The larger bowl diameter also improves airflow distribution, allowing hot butane gas to pass through the herb bed more uniformly. Despite the bigger size, the XL retains the same click-mechanism cap and fits standard DynaVap stems.
Comments
No comments yet. Be the first!
Sign in to comment