Pros
- Convection heating for clear flavor.
- Just 97 g, very light.
- Water pipe compatible.
- Pass-through charging available.
- Temp range 180-230C.
Cons
- 1000 mAh battery is small.
- 30 s heat-up time.
- No app and no dosing caps.
Price Comparison (10 shops) 59–80 €
Last updated: 28/03/2026, 7:21 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Heating Method | Convection |
| Device Type | Portable |
| Brand | Katalyzer |
| Power Source | Battery |
| Temperature Range | 200°C - 220°C |
| Heat-up Time | 30 seconds |
| Battery Capacity | 1000 mAh |
| Warranty | 2 years |
| Water Pipe | View water pipe adapters |
| Session Mode | Session |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Glass |
| Battery Type | Internal |
| Replaceable Battery | No |
| Passthrough Charging | Yes |
| Charging Port | USB-C |
Source: Puff Puff PalaceRetailer · Verified 18.02.2026
About this vaporizer
The Katalyzer Vapter is a German convection portable with a narrow temperature range — 200 to 220°C — that reflects a deliberate design philosophy. Rather than offering a wide temperature dial, Katalyzer has tuned the device to operate in the zone that works best for most dry herb. It's a focused approach, and one that suits users who already know where they want to be temperature-wise.
The 1000 mAh battery is small and honest about it. The Vapter isn't designed for all-day use on a single charge. Two to three good sessions per charge is realistic. Passthrough charging compensates for this at home — plugged in, it runs continuously, which turns the small battery into less of a limitation than it looks on paper.
Heat-up runs around 30 seconds, which is reasonable for convection. The airflow has to reach operating temperature before it can work through the load properly, so convection devices are rarely as instant as conduction. Thirty seconds is not a long wait, and the draw quality that follows is worth it.
Water pipe compatibility is built in. Convection vapor through a water attachment is genuinely pleasant — already clean and terpene-forward, then cooled and filtered on top of that. It's a combination that makes the Vapter more than just a portable for home use.
Katalyzer backs the device with a two-year warranty. The Vapter occupies a specific space in the market: a compact, German-made convection vaporizer for users who want precise temperatures, clean vapor, and a size that doesn't dominate a pocket or bag.
- Convection heating for clear flavor.
- Just 97 g, very light.
- Water pipe compatible.
- Pass-through charging available.
- Temp range 180-230C.
- 1000 mAh battery is small.
- 30 s heat-up time.
- No app and no dosing caps.
The Katalyzer Vapter from Katalyzer is a glass adapter that turns DynaVap vaporizers into a desktop setup with induction heating. Instead of a torch, the DynaVap tip is inserted into the Vapter's induction coil and heated electrically. This eliminates the open flame and makes use more precise and comfortable. The Vapter is made of heat-resistant borosilicate glass and is designed for stationary home use.
Katalyzer is a small European manufacturer specializing in induction accessories for DynaVap. With 5 shops in the price comparison, the best price is found quickly.
See also: Katalyzer Mini · VapHit X · Weha · Katalyzer Rubilyzer
Induction Heating Instead of a Torch
The Katalyzer Vapter uses electromagnetic induction to heat the stainless steel tip of a DynaVap. The tip sits inside the glass chamber surrounded by the induction coil, reaching operating temperature in seconds.
Advantages over a torch: more even heating, no butane aftertaste, and no burn risk from an open flame. For DynaVap users tired of the torch ritual, the Vapter is a significant comfort upgrade.
The induction unit is sold separately -- the Vapter is only the glass adapter, not the heater itself. It is compatible with most DynaVap induction heaters (e.g., Ispire Wand, Koil Boi).
Heat-up time depends on the induction device used. Typically 5-10 seconds until the DynaVap cap clicks -- faster than most torches.
Borosilicate Glass and Vapor Cooling
The Vapter is made of heat-resistant borosilicate glass (Schott Duran grade). The material withstands induction heat, releases no contaminants, and is flavor-neutral. Compared to metal or plastic adapters, vapor stays pure.
The glass body has a slight curve that serves as a short vapor path. Vapor cools slightly on the way to the mouthpiece -- less than a long glass stem but noticeably compared to a direct DynaVap draw.
Wall thickness is about 2 mm. Robust enough for stationary use but more fragile than metal accessories. Drops onto hard floors can break it.
Cleaning is simple: soak in isopropyl alcohol, rinse with warm water. Stubborn residue dissolves overnight. No moving parts, no seals to wear out.
Compatibility and Use
The Vapter is compatible with all DynaVap models using a standard stainless steel tip. This includes the M series, VonG, Omni, and most third-party tips with DynaVap dimensions.
The adapter transforms the portable DynaVap into a stationary desktop setup. Combined with an induction heater, the workflow is: insert DynaVap, press the button, wait for the click, inhale. No torch fiddling.
Optionally, the Vapter can connect to a water pipe. The glass joint fits common 14 mm or 18 mm joints (depending on the model). This turns the DynaVap into an induction bong system.
For travel, the Vapter is less practical -- glass plus induction heater plus DynaVap means three separate components. The intended use case is the desk or couch at home.
Price Comparison and What Is Included
The Katalyzer Vapter is listed in 5 shops on vapochecker.com. Prices vary by shop and availability -- comparing is worthwhile since the Vapter as a niche product is not always priced identically.
The box typically contains only the glass adapter. Induction heater and DynaVap must be owned separately. The complete setup requires three purchases:
- DynaVap (any model with stainless steel tip)
- Induction heater (e.g., Ispire Wand, Koil Boi)
- Katalyzer Vapter (this glass adapter)
Users who already own a DynaVap and induction heater need only the Vapter as an add-on. The price comparison helps find the cheapest offer among the 5 shops.
Comments
No comments yet. Be the first!
Sign in to comment