QaromaShop Staroma 360
Pros
- 360° design with stainless steel balls instead of ruby — more affordable ball vape entry
- Up to 399 °C pure convection, on-demand
- Robust stainless steel balls — nearly indestructible
- Fits 14/18 mm water pipes
Cons
- Stainless steel instead of ruby — slightly less heat retention
- Wall power required
- Water pipe needed separately
Price Comparison (2 shops)
Last updated: 28/03/2026, 8:49 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Heating Method | Convection |
| Device Type | Ball Vape |
| Brand | QaromaShop |
| Power Source | AC Power |
| Temperature Range | 191°C - 254°C |
| Heat-up Time | 180 seconds |
| Warranty | 99 years |
| Water Pipe | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Metal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | AC |
Source: OfficialOfficial, OfficialOfficial · Verified 18.02.2026
About this vaporizer
The Staroma 360 is QaromaShop's answer to a specific question: what if you heated the titanium ball mass evenly from all directions? Most ball vapes heat from one side, which creates some temperature variation within the ball charge. The Staroma 360 uses a 360-degree heating element that surrounds the balls, minimising hot spots and producing more uniform heat distribution throughout the chamber.
In practice, this means each draw benefits from a more consistent thermal environment. Long sessions with back-to-back draws put thermal recovery demands on any ball vape, and the 360-degree design handles that better than unidirectional heating. If you're looking for a ball vape where every hit tracks closely to the one before it, that design choice matters.
Operating temperatures run from 191°C to 254°C — a range that's more approachable than the extreme high-temp ball vapes and suits a wider range of preferences. The device runs on AC power with a three-minute warm-up. No battery management, stable consistent output for the duration of your session.
Dosing capsule support and water pipe compatibility are standard features. Like all QaromaShop devices, the Staroma 360 is designed to be used through glass, and the vapor quality through a good bubbler reflects the care that went into the heating design. Lifetime warranty included.
- 360° design with stainless steel balls instead of ruby — more affordable ball vape entry
- Up to 399 °C pure convection, on-demand
- Robust stainless steel balls — nearly indestructible
- Fits 14/18 mm water pipes
- Stainless steel instead of ruby — slightly less heat retention
- Wall power required
- Water pipe needed separately
The QaromaShop Staroma 360 combines compact ball vape design with 360-degree convection and PID control up to 254 C. AC-powered, WPA 14/18 mm, dosing capsule compatible. An entry point into the QaromaShop range for users who value moderate temps and clean vapor flavor. Our price comparison shows current prices.
See also: Taroma 360 · Baroma 2.0 · Taroma 3.0 · Qaroma XL
Compact Ball Vape Design
The Staroma 360 is the most compact model in the QaromaShop family. Despite its smaller size, it uses the same quartz ball principle: hot balls heat the airflow, which warms the material by pure convection. 360-degree airflow eliminates dead zones in the chamber. PID regulation holds temperature steady at up to 254 C.
Dosing Capsules and Chamber
Unlike the 360XLS, the Staroma 360 supports stainless steel dosing capsules. This simplifies switching between sessions and keeps the chamber clean. Without a capsule, the chamber holds about 0.15 g. Pre-filled capsules are handy for planned sessions.
WPA and Accessories
The 14/18 mm WPA joint connects directly to water pipes and bubblers. Without a water pipe, a glass mouthpiece or silicone whip works. QaromaShop offers various adapters and spare glass heads across the range.
Staroma 360 vs. Other Models
The Taroma XL reaches 371 C for concentrates. The Baroma 2.0 also hits 371 C with a wider head. The 360XLS shares the 254 C cap with more ball volume. The Staroma 360 is the entry model, ideal for capsule users.
Cleaning and Durability
Quartz balls need little care. Dry brush after each session. Glass parts soak in isopropanol. Capsules can be batch-cleaned. The heater is maintenance-free. Simple construction with replaceable parts ensures years of use.
Stainless Steel Construction and Heat Retention
The Staroma 360 uses a 316L stainless steel heating head that is corrosion-resistant and food-grade. The stainless steel balls inside store heat more efficiently than glass balls and release it more evenly into the airstream. At an operating temperature of 220 degrees Celsius, the head maintains stable heat even during strong draws because the thermal mass of the steel balls compensates for temperature drops. Between draws, ten to fifteen seconds is enough for the balls to reach full temperature again. The stainless steel surface cleans easily with isopropanol and shows no discoloration or material fatigue even after months. Another advantage over glass: stainless steel balls will not break if the device is accidentally dropped.
Staroma 360 Whip Guide
The Staroma 360 uses a traditional whip delivery system — ground material sits in the ceramic heating element while you draw through the attached tubing. Pack about 0.15 g and draw slowly for 6-8 seconds per puff. The whip cools vapor naturally over its length, making higher temperatures more comfortable. Clean the whip connector weekly by wiping with isopropyl alcohol. Replace the whip tubing every 3-4 months for hygiene. The desktop form factor means zero battery concerns.
Frequently Asked Questions
Official Resources
More QaromaShop Vaporizers 4
Similar Vaporizers 4
Compatible Accessories
Adapters
8
Comments
No comments yet. Be the first!
Sign in to comment