Prices tracked daily across 100+ shops. Last reviewed: March 2026.

DynaVap M7 vs Tinymight 2: Butane Ritual or Electric Convection?

The DynaVap M7 and Tinymight 2 sit at opposite ends of the portable vaporizer spectrum. One runs on a butane torch and rewards you with an analog ritual. The other heats up in 3 seconds flat and delivers pure convection at the press of a button. Both are on-demand devices: you only get vapor when you draw. Both have fiercely loyal communities. And both cost surprisingly little.

Current prices: DynaVap M7 from ~49 EUR across 103 shops and Tinymight 2 from ~187 EUR across 63 shops.

DynaVap M7 – Butane, Click, Vapor

The DynaVap M7 has no battery, no electronics, no charging time. You heat the stainless steel cap with a butane torch, wait for the audible click (about 7 seconds), and draw. That is the entire process. No display, no button, no cables – just metal, heat, and vapor.

The M7 is DynaVap’s latest revision of their signature design. All stainless steel, pocket-sized, weighs almost nothing. The chamber holds roughly 0.1 g, which makes it a natural fit for microdosers. Dosing capsules are compatible, and a water pipe adapter connects the M7 to any 14mm piece.

Temperature is controlled by flame placement: closer to the tip means hotter, further down means milder. This takes practice. Expect 3 to 5 sessions before you find your rhythm, but the learning curve is worth it. In return, you get total independence from power outlets and batteries. Camping, hiking, power outage – the M7 always works.

DynaVap offers a lifetime warranty on the body. The cap and screen are consumables and cost very little to replace. The accessory ecosystem is massive: different stems in wood, titanium, or glass, interchangeable tips, induction heaters as a flame-free alternative to the torch, Dynastashes for storage. For many DynaVap owners, collecting and configuring is a hobby in itself.

From ~49 EUR – M7 price comparison (plus torch ~15–30 EUR)

Tinymight 2 – 3 Seconds to Vapor

The Tinymight 2 is an electric on-demand convection vaporizer made in Finland. It heats up in 3 seconds – the fastest electric vaporizer available. Press the button, draw, done. No preheating, no waiting around.

Pure convection means hot air flows through the material without the chamber walls touching it. The result is exceptionally clean, flavor-forward vapor. Many users consider the Tinymight 2 the best-tasting portable vaporizer in existence.

The TM2 offers two modes: on-demand (single draw, heater stops after) and session (maintains temperature for several minutes). Temperature is set via a dial on the base – stepless, up to 240 degrees. No Bluetooth, no app, no frills. Turn it on, set the dial, go.

The battery is a replaceable 18650 with 2800 mAh. Spare batteries cost very little, and you are back in action within seconds. Passthrough charging works over USB-C – you can vape while the device charges. The body is made from wood – every unit looks slightly different. Tinymight builds everything in small batches in Finland.

Note: No dosing capsules. Direct loading into the glass chamber only. The accessory selection is limited – Tinymight is a one-product company from a small workshop, not an accessory empire like DynaVap.

From ~187 EUR – Tinymight 2 price comparison

Specs Comparison Table

Vapor Quality

Both devices produce excellent vapor, but they taste different. The Tinymight 2, with its pure convection, delivers light, flavor-forward vapor. The first draws taste almost like a terpene profile – clear, nuanced, with no roasted notes. That is because the material never touches the hot chamber walls.

The M7 uses a mix of conduction and convection. The cap heats the material directly while the airflow extracts additional compounds. This produces denser clouds and a slightly bolder flavor profile. At low temperatures (flame far from the tip), the M7 gets surprisingly close to pure convection devices in terms of taste.

Through a water pipe, both perform exceptionally well. The TM2 has a native 14mm connection – just drop it in and go. The M7 needs an adapter (a few euros), but works just as well after that. Water-cooled vapor from the TM2 is considered by many users to be the reference standard for portable flavor.

On-Demand: Two Paths to the Same Goal

Both devices are true on-demand vaporizers – they only heat when you actively use them. Session vaporizers like the Mighty+ or Crafty+ run their heater for several minutes regardless of whether you draw. On-demand saves material and gives you full control over every single draw.

With the M7, on-demand is built in by design: the cap only retains heat briefly after the click. Within 30 to 60 seconds, it cools back down. Take one or two draws, put the M7 away, come back later. No material wasted, no power consumed.

The TM2 offers both on-demand and session mode. In on-demand mode, it heats only while you hold the button. In session mode, it maintains temperature for several minutes – handy when you want to sit back and vape at your own pace.

Butane vs Battery: Which Suits You?

This is the core question. Not which vaporizer is objectively better, but which power source fits your daily life.

Choose the DynaVap M7 if you:

• Enjoy the ritual – flame, click, draw. For many people, that is half the appeal.
• Want independence from electricity. Outdoors, travel, emergencies – butane is enough.
• Want to spend as little as possible. 49 EUR plus a torch, you are done.
• Like tinkering. DynaVap’s accessory world is half hobby, half collector scene.
• Do not care much about discretion. A torch stands out.

Choose the Tinymight 2 if you:

• Prioritize flavor above everything. Pure convection = purest taste.
• Need speed. 3 seconds, press a button, go.
• Want discretion. No torch, no lighter, no flame.
• Use session mode. The TM2 maintains temperature over minutes.
• Value replaceable batteries. Swap in an 18650, keep going.

Learning Curve and Daily Use

The M7 takes practice. The right flame position, distance from the cap, the moment to start drawing – this does not click on the first try. Plan for 3 to 5 sessions before you are satisfied. After that it becomes second nature, and you can control the temperature intuitively. Some users heat the cap from the side, others from below. Some spin the M7 during heating, others hold it still. There is no single correct method – that is part of the appeal.

The TM2 is more straightforward: set the dial, press the button, draw. The learning curve is limited to draw technique – with pure convection you draw slowly and steadily, not in quick puffs. Draw too fast and you get little vapor. Draw too slowly and you get dense, hot vapor. You find the right rhythm after 2 to 3 draws.

In everyday situations, the TM2 is more discreet. No torch, no click sound, no visible flame. The M7 with a torch draws attention – in public, that matters. If you want stealth with the M7, you buy an induction heater (from ~80 EUR), but then total cost rises significantly.

Cleaning and Maintenance

The M7 is as simple to clean as it gets. Disassemble it into individual parts (cap, tip, condenser, body), soak everything in isopropyl alcohol, rinse, done. Stainless steel is practically indestructible – you cannot break anything. Cleaning takes 5 minutes and should happen every 1 to 2 weeks.

The TM2 has a glass chamber that you clean occasionally with a cotton swab and some isopropyl alcohol. The heating element itself rarely needs attention. Overall, the TM2 is also low-maintenance, but the glass parts require a bit more care than the all-metal M7.

Price and Total Cost

The M7 is the cheapest entry into high-quality vaping: from 49 EUR. Add a butane torch (15–30 EUR) and butane gas. Total startup cost: roughly 60–75 EUR. Running costs are minimal – a can of butane costs 2 to 3 EUR and lasts weeks to months.

The Tinymight 2 starts at 187 EUR and needs no torch. Electricity for charging is negligible. A spare 18650 battery costs 5–10 EUR and is worth having for on the go. The TM2 actually has lower entry costs when you factor in the torch.

Long-term, both have minimal operating costs. The M7 carries a lifetime warranty on the body – the thing survives practically anything. Drop it, get it wet, overheat it – stainless steel handles it all. The TM2 comes with 3 years warranty and is handmade in Finland. The wooden body is sturdy but not indestructible like steel.

The Communities

Both devices have unusually active communities. DynaVap users share heating techniques, show off their stem collections, and endlessly debate induction heaters versus torches. The Tinymight 2 has a smaller but equally dedicated following, focused on flavor appreciation and build quality.

Both manufacturers maintain a direct connection to their users. DynaVap regularly releases new models, special colors, and limited editions. Tinymight is run by a single craftsman in Helsinki who personally responds to feedback. You can feel that in both products – neither feels like an anonymous mass-produced gadget.

Verdict

The DynaVap M7 and Tinymight 2 are not competitors. They serve fundamentally different preferences. The M7 is for people who want an analog ritual, who value independence from power sources, and who enjoy tinkering with their setup. The TM2 is for anyone seeking the purest flavor at maximum speed – electric, straightforward, instantly ready.

If you cannot decide: both together cost less than many single premium vaporizers. The M7 as a backup and outdoor device, the TM2 as your main unit at home – that is a combination many experienced users run exactly this way.

DynaVap M7 price comparison (103 shops) | Tinymight 2 price comparison (63 shops)

Frequently Asked Questions