Sticky Brick Junior
Pros
- Pure convection heating
- Handcrafted wooden design
- 3-second heat-up time
- No battery required
Cons
- Steep learning curve
- Requires butane torch
- Not water pipe compatible
Price Comparison (14 shops) 122–202 €
Last updated: 28/03/2026, 9:06 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Heating Method | Convection |
| Device Type | Butane Vaporizer |
| Brand | Sticky Brick |
| Power Source | Butane |
| Heat-up Time | 3 seconds |
| Weight | 190 g |
| Dimensions | 11.4 x 7.6 x 2.5 cm |
| Warranty | 99 years |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Glass |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | none |
| Status | Limited Edition |
Source: OfficialOfficial, OfficialOfficial, La Centrale VapeurRetailer · Verified 20.02.2026
About this vaporizer
The Sticky Brick Junior is a handcrafted wooden butane vaporizer with pure convection heating. A butane flame is directed through a glass opening onto the air stream, which heats the material in the wooden chamber housing. The heating is carried out exclusively by hot air - no metal touches the material. The result is a very direct, aromatic convection steam with a 3-second heat-up time.
The device is not compatible with hookahs and does not require any electronics or batteries. Dosing capsules are supported. The wooden construction - depending on the variant, walnut, oak or other wood - makes each device a little unique. The operation is manual: draft and flame strength directly determine the steam intensity.
The Sticky Brick Junior is for experienced users who value convection quality and craftsmanship aesthetics. The learning curve is steeper than with battery-powered devices, but the vapor is unique to many connoisseurs. The device is not discreet - it requires a butane flame and accordingly attracts attention.
- Pure convection heating
- Handcrafted wooden design
- 3-second heat-up time
- No battery required
- Steep learning curve
- Requires butane torch
- Not water pipe compatible
The Sticky Brick Junior from Sticky Brick Labs is a portable butane-powered vaporizer handmade in the USA, with no electronics or battery whatsoever. The principle: a butane torch heats air that flows through a glass channel over the herb material -- pure convection heating on demand. Dense vapor clouds arrive within 3-5 seconds, with no warm-up phase.
The body is crafted from solid hardwood by hand, and the entire air path runs through borosilicate glass. At roughly 170 grams, the Junior fits in a jacket pocket. It is listed in 6 shops across our price comparison -- a niche product with a devoted following.
See also: Flip Brick · Sticky Brick Runt · OG Brick · Sticky Brick Maxx
Butane Convection: Instant Vapor Without Electronics
The operating principle of the Sticky Brick Junior differs fundamentally from electronic vaporizers. A butane torch lighter (not included) is briefly held over the glass intake. The heated air flows through a glass channel directly over the material in the chamber -- pure convection.
Temperature control is manual, governed by three factors:
| Factor | Effect | Adjustment |
|---|---|---|
| Flame distance | Base temperature | 1-3 cm above the glass intake |
| Draw speed | Airflow rate | Slow = hotter, fast = cooler |
| Flame angle | Heat distribution | Direct vs. slightly offset |
After 2-3 sessions, the technique clicks. The learning curve is steeper than with electronic devices, but the payoff is immediate: vapor in 3-5 seconds, no heat-up time, no waiting. For a quick hit between tasks, few devices are faster.
Unlike electronic vaporizers, there is no display and no preset temperatures. That is deliberate: Sticky Brick Labs focuses on craftsmanship and a tactile experience rather than technology.
Handcrafted Hardwood and Glass Air Path
Every Sticky Brick Junior is handmade from solid hardwood in the USA. Depending on the batch, different wood species are available -- walnut, cherry, maple, or more exotic options. No two Juniors look exactly the same.
The entire vapor path is borosilicate glass: the intake through which hot air enters, and the outlet from which vapor is inhaled. Glass has a decisive advantage over metal or plastic: it is flavor-neutral and chemically inert. The vapor tastes purely of herbs, with no off-flavors from the material.
The device consists of three parts: the wooden body with integrated chamber, the glass intake, and a glass cover (flame intake). All parts are separable, which simplifies cleaning. Replacement glass is available from the manufacturer and select retailers.
Build quality is high. The wood surfaces are sanded and waxed, and the glass components fit precisely. For a handcrafted product, the consistency is remarkable -- Sticky Brick Labs has refined this over years.
On-Demand Extraction: Individual Hits When You Want Them
The Junior is an on-demand vaporizer. Unlike session devices that hold a chamber at constant temperature, the Junior only heats when you actively apply a flame and draw. No draw, no heat -- the material is not further heated between hits.
What that means in practice:
- Single hits: Take one draw, put the device down. Ten minutes later, take the next. The material is still fresh.
- Material savings: Session vaporizers heat the entire chamber for 5-10 minutes -- even if you only take 2-3 draws. The Junior heats only what you need.
- No auto-shutoff: No timer ending the session. You are done when you decide you are done.
For microdosers, this is ideal. A chamber load of 0.1-0.15 grams produces 3-5 draws with good vapor density. In session devices, such a small amount often does not extract evenly.
Chamber and Material: Optimal Loading and Cleaning
The Sticky Brick Junior's chamber is set into the wooden body and fitted with a stainless steel screen at the bottom. The optimal load is 0.1-0.15 grams -- loosely placed, not packed. Packing too tightly blocks airflow and impairs convection.
Grind consistency matters more than with conduction devices. A medium to coarse grind is recommended. Material ground too finely can fall through the screen or restrict airflow. A coarser grind lets hot air flow evenly through the herb.
Cleaning is straightforward: soak the glass intake and outlet pieces in isopropyl alcohol (15-30 minutes), brush the wood body with a dry brush. No alcohol on the wood -- it damages the finish. The stainless steel screens can also be soaked in alcohol or replaced.
The package includes spare screens, a cleaning brush, and with most retailers a small cleaning kit. Glass parts are available separately as replacements.
Water Pipe and Bong: Native Glass Connection
The Sticky Brick Junior has a native glass outlet that fits directly onto a 14 mm or 18 mm bong (depending on model version or with a matching adapter). This is one of the biggest design advantages: the vapor path stays entirely glass -- from intake through the material into the water.
The combination of butane convection and a bong is popular among experienced users. The reasons:
- Massive hits: On-demand convection delivers more vapor in a single draw than most electronic devices manage.
- Water cooling: Vapor temperature with butane devices is harder to dose -- water evens that out.
- Pure flavor: Glass-on-glass means no taste distortion from adapters or gaskets.
If you primarily use the Junior at home, bong compatibility is a genuine benefit. On the go, the device works fine without a bong via the glass outlet -- functioning as a normal portable vaporizer.
Price and Availability: 6 Shops Compared
The Sticky Brick Junior sits in the mid price range for portable vaporizers -- notable for a device with zero electronics. The price is justified by handmade production in the USA, quality hardwoods, and the all-glass vapor path.
Comparison with other portable vaporizers:
| Device | Heating | Battery | On-Demand |
|---|---|---|---|
| Sticky Brick Junior | Convection (butane) | None | Yes |
| DynaVap M Plus | Conduction (butane) | None | Yes |
| XMAX Starry 3 | Conduction (battery) | 18650 replaceable | No |
| Arizer Solo 3 | Convection (battery) | Internal | No (session) |
With 6 shops in the price comparison, European availability is limited but stable. Prices vary by wood type and edition -- limited wood species sometimes cost significantly more than standard versions.
Note: a butane torch lighter is not included. Single-flame jet lighters are recommended. Cheap lighters work, but a quality jet lighter noticeably improves the experience.
Comments
No comments yet. Be the first!
Sign in to comment